Complete gullies two-part/socket inclination: 90° – DN 70 | gravity drainage
Product benefits
- With sealing membrane inserted on site
- Unit checked for leaks
Product information
- Flat roof gullies tested to DIN EN 1253
- Made from stainless steel, material grade 304
- Building material class A1
- Airlock with fire protection insert
- Insulation
- Uninsulated with/out heating
- Sarnafil TG 66-15
- For loose placement
- For planted, gravelled roofs with foot and vehicle traffic
- For roofs with additional loads
- Sikaplan 15 G
- For loose placement with mechanical fixing
- Up to a roof gradient of maximum 20°
- For roofs without additional loads
- With clamping flange for sealing with a sealing membrane
- Usable for two sealing planes
- Incl. vapour seal bitumen membrane Sikabit V60
- Socket inclination: 90°
Fire protection
Fire resistance class R 30 – R 120 tested as per Gen. Build. Sup.: Z-19.17-1872
Infobox
Note: Delivery time for works pre-assembled Sarnafil membrane TG 66-15 and Sikaplan 15 G depends on the version: from inventory, or up to max. 14 days
Note: Delivery time for works pre-assembled membranes from other manufacturers: on request.
Note: For gullies without membranes the additional seals must be ordered separately.
Top sections and gratings for roof gullys
Top sections and gratings for roof gullys made of stainless steel
Control shaft
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Stainless steel, material grade 304
- Load class: K 3
- Weight: 5.3 kg
- Rabattgruppe: 13
Insulating body
Suitable for
- Spin stainless steel flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
Flat roof heating
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
- Rabattgruppe: 1
Flat roof heating with thermostat
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
- Rabattgruppe: 1
airlock
Description
- Version with fire protection mastic
- With Gen. Build. Sup. Appr.: Z‑19.17‑1872
- Weight: 0.7 kg
- Rabattgruppe: 13
Gravel trap for inverted roof
Description
- Stainless steel, material grade 304
- Load class: H 1.5
- Weight: 1.5 kg
Sliding flange
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 70
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- For unheated version
- Weight: 2.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- EPDM
- Weight: 0.2 kg
- Rabattgruppe: 13
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- PVC-weich
- Weight: 0.3 kg
- Rabattgruppe: 13
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- NBR/SBR
- Weight: 0.3 kg
- Rabattgruppe: 13
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Made of EPDM
- For box channels
- Thickness: 5 mm
- Weight: 0.2 kg
- Rabattgruppe: 13
Insulation
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.1 kg
Insulation
Suitable for
- Inlet funnel
Description
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.1 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.8 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.7 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
Damming ring
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- Weight: 1 kg
Holder sheet for trapezoidal panel roof
Suitable for
- Jet flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
- Spin flat roof gullies
- DN 70 – DN 125
- Socket inclination: 90°
Description
- Made from galvanised steel sheet
- Thickness: 1.5 mm
- Weight: 3.6 kg
Heat shield
Suitable for
- Spin/Jet stainless steel flat roof gullies
- DN 70
Description
- Made of stainless steel
- With M 8 dowels and 16 x M 8 hexagonal screws
- Weight: 2.7 kg
- Rabattgruppe: 13
Insulating body
Suitable for
- Jet stainless steel flat roof gullies
- Lower section: DN 70
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 0.8 kg
- Rabattgruppe: 1
Insulating body
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
- Rabattgruppe: 1
Insulating body
Suitable for
- Attika roof gullies Spin DN 70
- Jet flat roof gullies
- Socket inclination 1.5°
- DN 40 – DN 70
Description
- Made from cellular glass
- Height: 120 mm
- Weight: 2 kg
Insulation casing
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.3 kg
- Rabattgruppe: 13
Insulation casing
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.7 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Reduction from DN 70 to DN 40
- Length: 95 mm
- Made from galvanised steel
- Made of galvanised steel
- Weight: 0.4 kg
- Rabattgruppe: 8
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Reduction from DN 70 to DN 50
- Length: 105 mm
- Weight: 0.4 kg
- Rabattgruppe: 8
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Reduction from DN 100 to DN 70
- Length (l): 130 mm
- Weight: 0.8 kg
- Rabattgruppe: 8
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Reduction from DN 100 to DN 80
- Length (l): 120 mm
- Weight: 0.9 kg
- Rabattgruppe: 8