ACO ShowerDrain S+
Excitingly simple
The innovative ACO ShowerDrain S+ surprises with its simplicity as it designed with all installation phases in mind making the installation process simple, safe and convenient from start to finish. Convenient packaging simplifies the on-site logistics.
Height adjustment is carried out by means of plastic screws, which can shorten without any extra tools. The product offers toolless removal of the unused edge for installation directly on the wall.
Easy installation
For a special seal in the housing, the workable sealing sleeve (W3-I according to DIN 18534-3) is prepared. During the construction house, this construction protection is carefully protected through a prefabricated building protection. The construction protection is provided by an excavation area for the exterior. When using the wall mount, the non-worn incendiary can be removed. The height adjustment is carried out by means of plastic screws, which can be used in the form of elaborate constructions. A fine adjustment can be made on the foot screw on the foot, as well as from both sides.
Functional Design
The elegant shower profile is best through its quality. The set in the shade is determined in this way and an optimal and cleaning-friendly disposal is ensured. In addition, the profile can be made around 80 mm, without dabbling on a single profile extension to the surface. The installation and installation of the shower profile is enormously enhanced by a field of reference - the ACO Pad. When the floor fleece is up to a height of 10 mm, the shower profile is used without additional heating operations. When the ground fleece with a height> 10 mm, the extension piece is used for installation.
Easy cleaning
Use the tip & flip function to remove the rust and without additional aids. After the discovery of the hair clipper, the cleaning closure can always be taken into account for cleaning and a free access to the pipe guide. The explosion closure and the exhaust body are designed to ensure that no radicals or cantilever are used for the dirt outlets, so that no standing water can be removed in the run. These properties in combination with a high discharge value for long-term compliance.
The ACO ShowerDrain S+ in 3D!
Scan the QR code with your smartphone or tablet PC and use the new ACO ShowerDrain S+
The most important at a glance
Plumber and planner
Innovative yet surpassingly simple design which combines the possibilities of a conventional shower channel with the installation advantages of a floor drain. At the same time, it matches all standard tile formats and fits perfectly into bathrooms, especially where a design flush with the niche is desired without lateral tile pieces.
Exhibition and investor, architect and planner
Manual cleaning is to void clogging and unpleasant odor. ACO ShowerDrain S+ is designed with continent maintenance in mind. All the inner parts are easily removable enabling the full access to the pipeline. Generous internal radii and outlet unit position at the bottom prevents any standing water or solid parts aggregation.
Simple from the start
Plumbing features
The new ACO ShowerDrain S+ is all about simplicity. In order to make installation work as simple as possible, even in difficult construction site situations, particular attention was paid to a self-explanatory design when developing the new floor drain of ACO ShowerDrain S+. Modular system yes, sisyphus work no, because the drain body is pre-assembled at the factory and adjustment work can be carried out without tools.
Simple to the finish
Tiling features
Unpack, seal and install. This is how simple the individual steps of ACO ShowerDrain S+ installation are. Thanks to the intuitive design all individual working steps can be carried out without any additional preparatory work. Pre-assembled components: sealing membrane, channel profile, alignment support, makes the installation simple and convenient from start to finish.
Protective cover
When the waterproofing work begins, the protective cover for the construction period can be removed in a few simple steps. The oval protective cover, which is now separated, continues to protect the drain from dirt and is not removed until the tile adhesive for installing the profile has been applied.
Easy to clean
Self cleaning design
ACO ShowerDrain S+ is designed with cleaning performance in mind. Along the integrated gradient, the water reaches the grate opening quickly and efficiently on the electroplated surface, being transported away rapidly thanks to the large drainage capacity. The self-cleaning ability of the channel is thus significantly improved and standing residual water, which creates limescale stains, is reduced.
Electropolish surface
Compared to mechanical polishing, electropolishing optimizes the micro-roughness in such a way that the effective surface is reduced by up to 50 %, giving it a special, long-lasting shine. Such a refined surface offers hardly any points of attack for the adhesion of particles and standard in the field of sterile technology, more wear-resistant and corrosion-resistant.
Simple to keep clean
Maintenance features
The ACO ShowerDrain S+ is designed for easy everyday maintenance. Generous inner radii and the fact that the drain always runs completely empty prevent the accumulation of dirt. If maintenance is required, the grate and all internal components such as the hair strainer and foul air trap can be easily removed thanks to the tip & flip function.
Integrated gradient
The elegant shower channel profile impresses with its continuous, even surface and high quality. The slope is discreet and ensures optimal and easy-to-clean drainage. Edges and plastic edging were deliberately omitted to prevent dirt from accumulating on these transition surfaces.
Free Access
Once the foul air trap has been removed, it can be easily disassembled into two parts, cleaned and reassembled. It also gives full access to the pipe for any necessary maintenance. The new trap has two outer grip areas that allow it to be removed without reaching into the trap, making cleaning more hygienic.