Complete gullies two-part/socket inclination: 90° | siphonic drainage
Product benefits
- Unit checked for leaks
- Delivery of total gully in a single package
Product information
- Flat roof gullies tested to DIN EN 1253
- Made from stainless steel, material grade 304
- Building material class A1
- With fire protection insert
- Sealing membrane selectable
- Insulation
- Uninsulated
- Insulated with Styrofoam with/out heating
- Insulated with stone wool with/out heating
- With clamping flange for sealing with 1 sealing membrane
- Usable for 2 sealing planes
- Incl. vapour seal
- Socket inclination: 90°
Fire protection
Fire resistance class R 30 – R 120 only ND 100 tested as per Gen. Build. Sup.: Z-19.17-1888
Infobox
Note: Delivery time for works pre-assembled Sarnafil membrane TG 66‑15 and Sikaplan 15 G depends on the version: from inventory, or up to max. 14 days
- Sarnafil TG 66‑15 (For loose placement, for greened, gravelled roofs with foot and vehicle traffic, for roofs with additional loads)
- Sikaplan 15 G (For loose placement with mechanical fixing, up to a roof gradient of maximum 20°, for roofs without additional loads)
Note: Delivery time for works pre-assembled membranes from other manufacturers: on request.
Note: For gullies without membranes the additional seals must be ordered separately.
Nominal width: DN 70, Gravel trap basket: made of stainless steel
| Plastic gravel catchment | Stainless steel gravel catchment | |||
| Nominal width | Socket inclination | Design | Article No. 0174.46.66 | Article No. 0174.46.63 0174.46.64 |
| DN | l/s | l/s | ||
| 70 | 1.5� | 1-piece | 2.6 | 2.7 |
| 70 | 1.5� | 2-piece | 2.8 | 3.0 |
| 70 | 90� | 1-piece | 2.5 | 2.6 |
| 70 | 90� | 2-piece | 2.7 | 2.8 |
| 100 | 1.5� | 1-piece | 5.0 | 5.9 |
| 100 | 1.5� | 2-piece | 4.7 | 5.3 |
| 100 | 90� | 1-piece | 4.7 | 5.6 |
| 100 | 90� | 2-piece | 5.1 | 5.7 |
| 100, with fire protection insert | 90� | 1-piece | 5,0 | 5,0 |
| 100, with fire protection insert | 90� | 2-piece | 5,0 | 5,0 |
| 125 | 1.5� | 1-piece | 8.3 | 9.9 |
| 125 | 1.5� | 2-piece | 8.7 | 8.9 |
| 125 | 90� | 1-piece | 8.5 | 8.4 |
| 125 | 90� | 2-piece | 8.5 | 8.4 |
Top sections and gratings for roof gullys
Top sections and gratings for roof gullys made of stainless steel
Fire protection insert
Suitable for
- Flat roof gullies Spin
- DN 70
- Socket inclination: 90°
Description
- abZ: Z-19.17-2586
- aBG: Z-19.53-2587
- Attention: The discharge value is reduced by use!
- Weight: 0.2 kg
Heat shield
Suitable for
- Spin/Jet stainless steel flat roof gullies
- DN 70
Description
- Made of stainless steel
- With M 8 dowels and 16 x M 8 hexagonal screws
- Weight: 2.7 kg
Insulation casing
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.3 kg
Insulating body
Suitable for
- Jet stainless steel flat roof gullies
- Lower section: DN 70
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 0.8 kg
Control shaft
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Stainless steel, material grade 304
- Load class: K 3
- Weight: 5.3 kg
Gravel trap for inverted roof
Description
- Stainless steel, material grade 304
- Load class: H 1.5
- Weight: 1.5 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- EPDM
- Weight: 0.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- PVC-weich
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- NBR/SBR
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Made of EPDM
- For box channels
- Thickness: 5 mm
- Weight: 0.2 kg
Sliding flange
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 70
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- For unheated version
- Weight: 2.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.8 kg
Holder sheet for trapezoidal panel roof
Suitable for
- Jet flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
- Spin flat roof gullies
- DN 70 – DN 125
- Socket inclination: 90°
Description
- Made from galvanised steel sheet
- Thickness: 1.5 mm
- Weight: 3.6 kg
Gravel trap cover
Suitable for
- Spin Series stainless steel flat roof gullies
- Attika Spin/Jet roof gullies
- 45° and 90°
Description
- Stainless steel, material grade 304
- Height: 75 mm
- Weight: 1 kg
Gravel trap cover
Suitable for
- Spin Series stainless steel flat roof gullies
- Attika Spin/Jet roof gullies
- 45° and 90°
Description
- Stainless steel, material grade 304
- Height: 225 mm
- Weight: 1.6 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 125
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.1 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.7 kg
Insulation
Suitable for
- Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 125
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 1.1 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 1.5°
- DN 70
Description
- Made from styrofoam
- Height: 140
- Length x width: 260 x 190 mm
- Weight: 0.1 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 1.5°
- DN 100
Description
- Made from styrofoam
- Height: 170 mm
- Length x width: 280 x 230 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 1.5°
- DN 125
Description
- Made from styrofoam
- Height: 200
- Length x width: 280 x 230 mm
- Weight: 0.2 kg
Insulation casing
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.7 kg
Insulating body
Suitable for
- Spin stainless steel flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
Fire protection insert
Suitable for
- Spin flat roof gullies
- DN 100
- Socket inclination: 90°
- Multi-storey parking deck gullies
- 300 x 300 mm
- Socket inclination: 90°
Description
- Tested fire protection as per Gen. Build. Sup. Appr.: Z‑19.17‑1888/1887
- Please note: Outflow value is reduced by insert
- Weight: 0.4 kg
Heat shield
Suitable for
- Spin flat roof gullies
- DN 100
Description
- With M 8 dowel x 16
- Weight: 2.5 kg
Gravel trap
Suitable for
- Flat roof gully Spin made of stainless steel
- Parapet wall gully Spin made of stainless steel
- 45° and 90°
Description
- Plastic
- Weight: 0.1 kg
Flat roof heating
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Flat roof heating with thermostat
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Flat roof heating
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- Turboflow emergency gully made of stainless steel
- Flat roof gullies Passavant Spin made of cast iron
- DN 125 – DN 150
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 40 W
- Weight: 0.4 kg
Flat roof heating with thermostat
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- Turboflow emergency gully made of stainless steel
- Flat roof gullies Passavant Spin made of cast iron
- DN 125 – DN 150
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 40 W
- Weight: 0.4 kg
Damming ring for emergency overflow
Suitable for
- Parapet wall gully Spin made of stainless steel
- 45° and 90°
Description
- Weight: 0.7 kg
Damming ring for emergency overflow
Description
- Weight: 0.8 kg