Browser not supported

You are using an old browser that we do not support anymore. Please consider using a modern web browser such as Microsoft Edge, Google Chrome or Firefox for the best website experience.

Waste water lifting plant Muli Pro-PE N XL duo

Product benefits

  • Container can be configured individually to customer requirements
  • Good operational safety and reliability
  • Pump with adaptive impeller reduces blockages in operation
  • Large usable tank volume (up to 1100 litres, depending on model)
  • Choice of inlet height, depending on model
Contact
Downloads

Product information

  • Applications:
    • Commercial or industrial units with high levels of waste water
    • Downstream of grease separators
    • Waste water containing both long and short fibres
    • Apartment buildings
  • PE-HD tank
    • 1 x inspection opening for easy servicing (350 mm clear width) with odour-proof plug cap
    • Fixing kit for buoyancy-proof anchorage
    • Inlet optionally horizontal on the side or at the end, or vertically from above, choice of DN 100, DN 150 or DN 200
    • Vertical socket, choice of DN 70/100 (ventilation)
    • R 1½" drain plug
  • Two horizontally arranged pumps
    • 400 V/50 Hz
    • Protection type: IP 68
    • Adaptive impeller
    • Cable length: 10 m
  • Extension pressure line
    • Two special backflow valves with venting device
    • Special DN 100 mounting adapter for connecting pressure lines from 108 – 114 mm outer pipe diameter (optionally 88 – 90 mm)
  • Pneumatic level switching with pilot tube and pneumatic control line
  • Mini compressor with air bubble injection available as an accessory
  • Switch and alarm device
    • Protection type: IP 54
    • Cable and CEE plug (16 A): 1.5 m
    • Isolated collective fault and operating messages
    • Pneumatic control line and motor cable between lifting plant and switchbox: 10 m

Infobox

  • The tank on the Muli Pro-PE N XL duo is a configuration part that is manufactured to requirements. The usable volume, inlet height and sockets can be individually configured.
Scale drawing
TypeDescriptionMotor powerKey dataTotal

volume		WeightItem

number		Remember
P1P2Current

consumption		Volt-

age		Rev-

count
[kW][kW][A][V][r/min][l][kg]
Muli Pro-PE N-20 XL
  • Effective volume:
    • Min: 135 l
    • Max: 1135 l
  • Total volume:
    • Min: 375 l
    • Max: 2000 l
  • Weight:
    • Min: 410 kg
    • Max: 500 kg
2.323.8400146015755000175.59.20
Muli Pro-PE N-31 XL
  • Effective volume:
    • Min: 135 l
    • Max: 1135 l
  • Total volume:
    • Min: 375 l
    • Max: 2000 l
  • Weight:
    • Min: 410 kg
    • Max: 500 kg
3.73.16.8400146015755000175.59.21
Muli Pro-PE N-47 XL
  • Effective volume:
    • Min: 135 l
    • Max: 1500 l
  • Total volume:
    • Min: 375 l
    • Max: 2000 l
  • Weight:
    • Min: 600 kg
    • Max: 700 kg
5.64.710400146015755000175.59.22
Muli Pro-PE N-75 XL
  • Effective volume:
    • Min: 135 l
    • Max: 1135 l
  • Total volume:
    • Min: 375 l
    • Max: 2000 l
  • Weight:
    • Min: 410 kg
    • Max: 500 kg
8.67.516400146015755000175.59.24
Muli Pro-PE N-74 XL
  • Effective volume:
    • Min: 135 l
    • Max: 1135 l
  • Total volume:
    • Min: 375 l
    • Max: 2000 l
  • Weight:
    • Min: 410 kg
    • Max: 500 kg
8.57.416400292015755000175.59.23
Scale drawing
TypeMotor powerKey dataTotal

volume		WeightItem

number
P1P2Power consumptionVoltageRev count
ImageMuli Pro-PE N-20 XL2.3 kW2 kW3.8 A400 V1460 r/min1575 l500 kg0175.59.20
ImageMuli Pro-PE N-31 XL3.7 kW3.1 kW6.8 A400 V1460 r/min1575 l500 kg0175.59.21
ImageMuli Pro-PE N-47 XL5.6 kW4.7 kW10 A400 V1460 r/min1575 l500 kg0175.59.22
ImageMuli Pro-PE N-75 XL8.6 kW7.5 kW16 A400 V1460 r/min1575 l500 kg0175.59.24
ImageMuli Pro-PE N-74 XL8.5 kW7.4 kW16 A400 V2920 r/min1575 l500 kg0175.59.23
TypeDelivery headDelivery flow Q with overall delivery head HMedia temperature
4 m8 m12 m16 m20 m24 mNormalMaximum
[m][l/s][l/s][l/s][l/s][l/s][l/s][°C][°C]
Muli Pro-PE N-20 XL2 – 928.58.34065
Muli Pro-PE N-31 XL2 – 11.237.519.42.04065
Muli Pro-PE N-47 XL4 – 16.453.538.721.06.04065
Muli Pro-PE N-75 XL14 – 39.527.524.7521.54065
Muli Pro-PE N-74 XL6 – 19.252.035.518.02.04065

Flashing light

Image
Suitable for
  • Signalling unit with voltage-free fault reporting
  • LipuSmart-P
  • Muli-Max with signalling unit
  • LipuLift-P
Description
  • 230V
  • Power consumption: 70 mA
  • Weight: 0.5 kg
Item no.
0178.62.08

Flashing light

Image
Item no.
0150.76.25

Message system with GSM module

Suitable for
  • All grease separators
  • Grease layer thickness measuring device
  • Pre-tank plants
  • Technical processing systems
  • Quatrix-K backflow preventer type 3F
  • Sinkamat-K (underfloor) duo
  • Muli lifting units
  • Pumping stations
  • Installation sets
Description
  • Parameter via app (Android & iOs)
  • Mains-independent alarm via 12V lead-gel battery
  • Optical and acoustic alarm message
  • Freely configurable inputs
    • 6 digital inputs with LED status display
    • 1 analogue
  • 1 alarm output 12 V
  • Alarm forwarding via SMS to mobile phones
  • For mounting outside the hazardous area
  • Housing: 192 x 150(with cable gland) x 100 mm (WxHxD)
  • Protective doctor: IP54
  • Operating voltage: 230 V/AC 50/60 Hz
  • Translated with www.DeepL.com/Translator (free version)
  • Weight: 2 kg
Item no.
0150.80.14

Signalling unit

Image
Suitable for
  • Faecal matter backflow automatic stop Quatrix-K type 3F
  • All Muli wastewater lifting plants
  • Upstream tank plant mono/duo
  • Muli-Max
  • Sinkamat –K/-KD
  • Sinkamat-Z
  • Sinkamat-Z (underfloor)
    • Duo
  • LipuLift-P
Description
  • Self-charging
  • With floating contact
  • Visual and acoustic
  • Without contact transmitter
  • For mounting outside the potentially explosive atmosphere
  • Dimensions: 175 x 125 x 75 mm W x H x D
  • Protection type: IP65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Ready to plug in with cable: 2 m
  • Weight: 1.4 kg
Item no.
0150.26.73

Connection and flood module set

Image
Suitable for
  • Triplex-K backflow stops
    • DN 100 – DN 150
  • Quatrix-K backflow stops
  • All wastewater lifting plants
  • All separators
Description
  • To report a leak caused for example by a pipe bursting
  • For electrically conducting liquids
  • With volt free contact
  • Visible and audible alarms (approx. 80 dB)
  • Dimensions (width x height x depth): 160 x 120 x 75 mm
  • Protection level: IP 65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use: 1.4 m
  • Overflow indicator with 10 m cable
  • Weight: 1.1 kg
Item no.
0150.78.97

Signal horn

Image
Suitable for
  • Signalling unit
  • Signalling unit with GSM module
Description
  • Operating voltage: 12V DC
  • Power consumption: 30 mA
  • 62 x 62 x 85 mm (LxWxD)
  • Degree of protection: IP66
  • Noise level: 95 dB(A)
  • Weight: 0.2 kg
Item no.
0150.58.14

Signal horn

Image
Suitable for
  • Signalling unit with voltage-free fault reporting
  • LipuSmart-P
  • Muli-Max with signalling unit
  • LipuLift-P
Description
  • 230V AC
  • Power consumption: 30mA
  • Ø62x85 mm (L/B x T)
  • Protection: IP66
  • 95 dB(A)
  • Weight: 0.3 kg
Item no.
0178.61.94

Inlet valve DN 100

Image
Suitable for
  • Grease separator made of polyethylene
  • Starch separator made of polyethylene
  • Upstream tank systems type 2 and 4
  • LipuMobil – type 0.5
Description
  • Made out of PVC
  • Spigot Ø110 on both sides for sleeveless pipe systems made of cast iron or plastic
  • Total dimensions: 176 x 360 mm (L x H)
  • Weight: 5.9 kg
Item no.
0175.31.87

Inlet valve DN 150

Image
Suitable for
  • Wastewater lifting plant
  • Polyethylene grease separator
  • Polyethylene starch separator
  • Upstream tank plant
    • Type 7 – Type 10
Description
  • Made of PVC
  • 160 mm push socket on both sides with rim sealing ring
  • Overall dimensions: 226 x 510 mm (L x H)
  • Weight: 7 kg
Item no.
0175.13.85

Inlet valve DN 200

Image
Suitable for
  • Wastewater lifting plant
    • Muli-Star DDP 1/2
  • Grease separator made of polyethylene
    • From NS 20
Description
  • Made out of PVC
  • Push socket 200 mm with lip sealing ring on both sides
  • Total dimensions: 264 x 637 mm (L x H)
  • Weight: 8.4 kg
Item no.
0170.20.83

Inlet valve DN 150

Image
Suitable for
  • Grease separator made of polyethylene
  • Starch separator made of polyethylene
  • Upstream tank systems type 7 to 10
Description
  • Made out of PVC
  • Spigot Ø110 on both sides for sleeveless pipe systems made of cast iron or plastic
  • Total dimensions: 226 x 420 mm (L x H)
  • Weight: 10.2 kg
Item no.
0175.31.88

Inlet valve DN 100

Image
Suitable for
  • Wastewater lifting plant
  • Polyethylene grease separator
  • Polyethylene starch separator
  • Upstream tank plant
    • Typ 2 and 4
  • LipuMobil-P – Type 0.5
Description
  • Made of PVC
  • 110 mm push socket on both sides with rim sealing ring
  • Overall dimensions: 176 x 330 mm (L x H)
  • Weight: 3.1 kg
Item no.
0175.13.84

Hand membrane pump 1½"

Image
Suitable for
  • Wastewater lifting plant
Description
  • For fixing to wall
  • Incl. hose
    • Clear width: 48 x 80 mm
  • Incl, hose clamp
    • Clear width: 50 x 70 mm
    • Width: 12 mm
    • 2 pces required
  • Weight: 14.4 kg
Item no.
0175.23.73

Three way valve 1½"

Image
Suitable for
  • Wastewater lifting plant
Description
  • For hand membrane pump
  • Weight: 3.3 kg
Item no.
0159.10.14

Stop valve 1½"

Image
Suitable for
  • Wastewater lifting plant
Description
  • For hand membrane pump
  • Weight: 1 kg
Item no.
0159.10.12

Sealing ring

Image
Suitable for
  • LipuSmart-P
  • Powerlift installation kit DN 100
  • Fäkablock II
  • All Muli wastewater lifting plants
Description
  • As additional component for pressure line DN 80
  • Weight: 0.3 kg
Item no.
0159.37.97