Complete gullies single unit/socket inclination: 90° – DN 100 | gravity drainage
Product benefits
- With sealing membrane inserted on site
- Unit checked for leaks
Product information
- Flat roof gullies tested to DIN EN 1253
- Made from stainless steel, material grade 304
- Building material class A1
- With functional element
- Insulation
- Uninsulated
- Insulated with Styrofoam with/out heating
- Insulated with stone wool with/out heating
- Sarnafil TG 66-15
- For loose placement
- For planted, gravelled roofs with foot and vehicle traffic
- For roofs with additional loads
- Sikaplan 15 G
- For loose placement with mechanical fixing
- For roofs without additional loads
- With clamping flange for sealing with a sealing membrane
- Usable for one sealing plane
- Socket inclination: 90°
Infobox
Note: Delivery time for works pre-assembled Sarnafil membrane TG 66-15 and Sikaplan 15 G depends on the version: from inventory, or up to max. 14 days
Note: Delivery time for works pre-assembled membranes from other manufacturers: on request.
Note: For gullies without membranes the additional seals must be ordered separately.
Nominal width: DN 100
Control shaft
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Stainless steel, material grade 304
- Load class: K 3
- Weight: 5.3 kg
Insulating body
Suitable for
- Spin stainless steel flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
Airlock made of plastic
Suitable for
- Jet flat roof gullies
- DN 50
Description
- Plastic airlock and strainer cap made of stainless steel, material grade 304
- Weight: 0.8 kg
Airlock made of plastic
Suitable for
- Jet flat roof gullies
- DN 70
Description
- Plastic airlock and strainer cap made of stainless steel, material grade 304
- Weight: 0.9 kg
Airlock made of plastic
Suitable for
- Jet flat roof gullies
- DN 100
Description
- Plastic airlock and strainer cap made of stainless steel, material grade 304
- Weight: 0.9 kg
Flat roof heating
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Jet made of stainless steel
- DN 50 – DN 70
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Flat roof heating with thermostat
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Jet made of stainless steel
- DN 50 – DN 70
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Gravel trap for inverted roof
Description
- Stainless steel, material grade 304
- Load class: H 1.5
- Weight: 1.5 kg
Sliding flange
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 70
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- For unheated version
- Weight: 2.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Attika Spin/Jet roof gullies
- DN 50/DN 70
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- EPDM
- Weight: 0.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Attika Spin/Jet roof gullies
- DN 50/DN 70
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Soft PVC
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Attika Spin/Jet roof gullies
- DN 50/DN 70
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- NBR/SBR
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Made of EPDM
- For box channels
- Thickness: 5 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.1 kg
Insulation
Suitable for
- Inlet funnel
Description
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.1 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.8 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.7 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
Damming ring
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- Weight: 1 kg
Holder sheet for trapezoidal panel roof
Suitable for
- Jet flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
- Spin flat roof gullies
- DN 70 – DN 125
- Socket inclination: 90°
- Emergency gully Turboflow
- DN 50/DN 70
Description
- Made from galvanised steel sheet
- Thickness: 1.5 mm
- Weight: 3.6 kg
Gravel trap with airlock
Suitable for
- Spin/Jet stainless steel flat roof gullies
- DN 70
Description
- Version with fire protection mastic
- With Gen. Build. Sup. Appr.: Z‑19.17‑1872
- Weight: 0.7 kg
Heat shield
Suitable for
- Spin/Jet stainless steel flat roof gullies
- DN 70
Description
- Made of stainless steel
- With M 8 dowels and 16 x M 8 hexagonal screws
- Weight: 2.7 kg
Insulating body
Suitable for
- Jet stainless steel flat roof gullies
- Lower section: DN 70
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 0.8 kg
Insulating body
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
Insulating body
Suitable for
- Attika roof gullies Spin DN 70
- Jet flat roof gullies
- Socket inclination 1.5°
- DN 40 – DN 70
Description
- Made from cellular glass
- Height: 120 mm
- Weight: 2 kg
Insulation casing
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.3 kg
Insulation casing
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.7 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Made of galvanised steel
- Made from galvanised steel
- Reduction from DN 70 to DN 40
- Length: 95 mm
- Weight: 0.4 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Reduction from DN 70 to DN 50
- Length: 105 mm
- Weight: 0.4 kg
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Reduction from DN 100 to DN 70
- Length (l): 130 mm
- Weight: 0.8 kg
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Reduction from DN 100 to DN 80
- Length (l): 120 mm
- Weight: 0.9 kg
Profiline gully top
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Profiline
Description
- Height: 50 mm
- Dimensions: 400 x 400 mm
- Galvanised steel
Profiline gully top
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Profiline
Description
- Height: 50 mm
- Dimensions: 400 x 400 mm
- Stainless steel, material grade 304
Profiline gully top
Suitable for
- Jet/Spin series stainless steel flat gullies
- Profiline
Description
- Adjustable height: 78 – 108 mm
- Dimensions: 400 x 400 mm
- Galvanised steel
Profiline gully top
Suitable for
- Jet/Spin series stainless steel flat gullies
- Profiline
Description
- Adjustable height: 78 – 108 mm
- Dimensions: 400 x 400 mm
- Stainless steel, material grade 304
Mesh grating
Suitable for
- Profiline gully top
- 38150
- 38801
Description
- Galvanised steel
- Mesh width: 30 x 10 mm
- Not screwed
Mesh grating
Suitable for
- Profiline gully top
- 38150
- 38801
Description
- Galvanised steel
- Mesh width: 30 x 14 mm
- Not screwed
Mesh grating
Suitable for
- Profiline gully top
- 38156
- 38803
Description
- Stainless steel, material grade 304
- Etched
- Mesh width: 30 x 10 mm
- Not screwed
Mesh grating
Suitable for
- Profiline gully top
- 38156
- 38803
Description
- Stainless steel, material grade 304
- Etched
- Mesh width: 30 x 14 mm
- Not screwed