Bottom parts for gully body Jet | gravity drainage
Product information
- Stainless steel, material grade 304
- To connect the sealing membrane above the heat insulation.
Flat roof heating
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Flat roof heating with thermostat
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Holder sheet for trapezoidal panel roof
Suitable for
- Jet flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
- Spin flat roof gullies
- DN 70 – DN 125
- Socket inclination: 90°
- Emergency gully Turboflow
- DN 50/DN 70
Description
- Made from galvanised steel sheet
- Thickness: 1.5 mm
- Weight: 3.14 kg
- Weight: 3.6 kg
Heat shield
Suitable for
- Spin/Jet stainless steel flat roof gullies
- DN 70
Description
- Made of stainless steel
- With M 8 dowels and 16 x M 8 hexagonal screws
- Weight: 2.7 kg
Insulating body
Suitable for
- Jet stainless steel flat roof gullies
- Lower section: DN 70
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 0.8 kg
Insulating body
Suitable for
- Attika roof gullies Spin DN 70
- Jet flat roof gullies
- Socket inclination 1.5°
- DN 40 – DN 70
Description
- Made from cellular glass
- Height: 120 mm
- Weight: 2 kg
Insulation casing
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.3 kg
Insulation casing
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.7 kg
Insulation
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.09 kg
- Weight: 0.1 kg
Insulation
Suitable for
- Inlet funnel
Description
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.04 kg
- Weight: 0.1 kg
Insulation
Suitable for
- Greenline 2.0 overall width 120 mm
Description
- Insulation for inlet funnel
- Made of stone wool
- Building material class A1
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.6 kg
- Weight: 0.8 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.6 kg
- Weight: 0.7 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
- Weight: 0.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Weight: 0.3 kg
- EPDM
- Weight: 0.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Weight: 0.3 kg
- PVC-weich
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Weight: 0.3 kg
- NBR/SBR
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Made of EPDM
- For box channels
- Thickness: 5 mm
- Weight: 0.2 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Weight: 0.5 kg
- Reduction from DN 70 to DN 40
- Length: 95 mm
- Made from galvanised steel
- Weight: 0.5 kg
- Made of galvanised steel
- Weight: 0.4 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Weight: 0.5 kg
- Reduction from DN 70 to DN 50
- Length: 105 mm
- Weight: 0.4 kg
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Weight: 0.9 kg
- Reduction from DN 100 to DN 70
- Length (l): 130 mm
- Weight: 0.8 kg
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Weight: 0.9 kg
- Reduction from DN 100 to DN 80
- Length (l): 120 mm
- Weight: 0.9 kg
Complete gullies single unit/socket inclination: 90° – DN 70 | gravity drainage
Complete gullies single unit/socket inclination: 90° – DN 100 | gravity drainage
Complete gullies two-part/socket inclination: 90° – DN 70 | gravity drainage
Complete gullies two-part/socket inclination: 90° – DN 100 | gravity drainage
Complete gullies single unit/socket inclination: 0° – DN 40 – DN 70 | gravity drainage
Complete gullies single unit/socket inclination: 90° – DN 70 | gravity drainage
Complete gullies two-part/socket inclination: 90° – DN 70 | gravity drainage