Complete gullies single unit/socket inclination: 0° – DN 40 – DN 70 | gravity drainage
Product benefits
- With sealing membrane inserted on site
- Unit checked for leaks
Product information
- Flat roof gullies tested to DIN EN 1253
- Made from stainless steel, material grade 304
- Building material class A1
- With functional element
- Insulation
- Uninsulated
- Insulated with Styrofoam with/out heating
- Insulated with stone wool with/out heating
- Sarnafil TG 66-15
- For loose placement
- For planted, gravelled roofs with foot and vehicle traffic
- For roofs with additional loads
- Sikaplan 15 G
- For loose placement with mechanical fixing
- For roofs without additional loads
- With clamping flange for sealing with a sealing membrane
- Usable for one sealing plane
- Socket inclination: 0°
Infobox
Note: Delivery time for works pre-assembled Sarnafil membrane TG 66-15 and Sikaplan 15 G depends on the version: from inventory, or up to max. 14 days
Note: Delivery time for works pre-assembled membranes from other manufacturers: on request.
Note: For gullies without membranes the additional seals must be ordered separately.
Nominal width: DN 40
| Socket diameter | Insulation | Sealing membrane | Weight | Item number | Downloads | Remember | |
|---|---|---|---|---|---|---|---|
| [mm] | [kg] | ||||||
 | 42 | Uninsulated | No sealing membrane | 5.2 | 1245.10.00 | ||
 | 42 | Uninsulated, heated | No sealing membrane | 5.4 | 1245.10.40 |
Bottom parts for gully body Jet | gravity drainage
Roofing membranes for Spin/Jet flat roof gullys made of stainless steel
Top sections and gratings for roof gullys
Top sections and gratings for roof gullys made of stainless steel
Control shaft
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Stainless steel, material grade 304
- Load class: K 3
- Weight: 5.34 kg
- Weight: 5.3 kg
Insulating body
Suitable for
- Spin stainless steel flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
Flat roof heating
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Flat roof heating with thermostat
Suitable for
- Flat roof gullies Jet/Spin series made of stainless steel
- DN 40 – DN 125
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Turboflow emergency gully made of stainless steel
- DN 50 – DN 70
- Flat roof gullies Passavant Spin made of cast iron
- DN 70 – DN 100
Description
- Mains connection: 220 – 240 V
- Degree of protection: IP 67
- Connection line
- H05RN-F2x1,0
- Length: 1 m
- Height: 95 mm
- Nominal power: 25 W
- Weight: 0.3 kg
Airlock made of plastic
Suitable for
- Stainless steel flat roof gullies
- DN 70
- Socket inclination: 90°
Description
- With air lock made from polypropylene
- Weight: 0.3 kg
- Weight: 0.3 kg
airlock
Description
- Version with fire protection mastic
- With Gen. Build. Sup. Appr.: Z‑19.17‑1872
- Weight: 0.7 kg
Gravel trap for inverted roof
Description
- Stainless steel, material grade 304
- Load class: H 1.5
- Weight: 0.63 kg
- Weight: 1.5 kg
Sliding flange
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 70
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- Weight: 2.3 kg
- For unheated version
- Weight: 2.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Weight: 0.3 kg
- EPDM
- Weight: 0.2 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Weight: 0.3 kg
- PVC-weich
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Parapet wall gully Spin/Jet made of stainless steel
- 45° and 90°
- Multiflex flat roof ducts
- DN 70/DN 100
Description
- Thickness: 4 mm
- Weight: 0.3 kg
- NBR/SBR
- Weight: 0.3 kg
Flange seal
Suitable for
- Jet/Spin series stainless steel flat roof gullies
Description
- Made of EPDM
- For box channels
- Thickness: 5 mm
- Weight: 0.2 kg
Insulation
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.09 kg
- Weight: 0.1 kg
Insulation
Suitable for
- Inlet funnel
Description
- Made from Styrofoam, PS 30
- Conforms to DIN 18164
- Weight: 0.04 kg
- Weight: 0.1 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.6 kg
- Weight: 0.8 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- For inlet-/pipe sockets
- Made of stone wool, building materials class A1
- Weight: 0.6 kg
- Weight: 0.7 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
- Weight: 0.2 kg
Insulation
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
Description
- Made from styrofoam
- Height: 250 mm
- Length x width: 205 x 205 mm
- Weight: 0.2 kg
- Weight: 0.2 kg
Damming ring
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
Description
- Stainless steel, material grade 304
- Weight: 1.1 kg
- Weight: 1 kg
Holder sheet for trapezoidal panel roof
Suitable for
- Jet flat roof gullies
- DN 70/DN 100
- Socket inclination: 90°
- Spin flat roof gullies
- DN 70 – DN 125
- Socket inclination: 90°
- Emergency gully Turboflow
- DN 50/DN 70
Description
- Made from galvanised steel sheet
- Thickness: 1.5 mm
- Weight: 3.14 kg
- Weight: 3.6 kg
Heat shield
Suitable for
- Spin/Jet stainless steel flat roof gullies
- DN 70
Description
- Made of stainless steel
- With M 8 dowels and 16 x M 8 hexagonal screws
- Weight: 2.7 kg
Insulating body
Suitable for
- Jet stainless steel flat roof gullies
- Lower section: DN 70
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 0.8 kg
Insulating body
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 100 mm
- Weight: 1.3 kg
Insulating body
Suitable for
- Attika roof gullies Spin DN 70
- Jet flat roof gullies
- Socket inclination 1.5°
- DN 40 – DN 70
Description
- Made from cellular glass
- Height: 120 mm
- Weight: 2 kg
Insulation casing
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.3 kg
Insulation casing
Suitable for
- Jet/Spin series stainless steel flat roof gullies
- DN 100
- Socket inclination: 90°
Description
- Made from cellular glass
- Height: 150 mm
- To equalise length
- Weight: 0.7 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Weight: 0.5 kg
- Reduction from DN 70 to DN 40
- Length: 95 mm
- Made from galvanised steel
- Weight: 0.5 kg
- Made of galvanised steel
- Weight: 0.4 kg
Optimisation element
Suitable for
- Spin/Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 70
Description
- Made from galvanised steel
- Weight: 0.5 kg
- Reduction from DN 70 to DN 50
- Length: 105 mm
- Weight: 0.4 kg
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Weight: 0.9 kg
- Reduction from DN 100 to DN 70
- Length (l): 130 mm
- Weight: 0.8 kg
Optimisation element
Suitable for
- Jet stainless steel flat roof gullies
- Socket inclination: 90°
- DN 100
- Multiflex flat roof ducts
- DN 100
Description
- Made from galvanised steel
- Weight: 0.9 kg
- Reduction from DN 100 to DN 80
- Length (l): 120 mm
- Weight: 0.9 kg