Emergency roof gully Turboflow

Product benefits

  • Achieves its discharge capacity of 17.8 l/s (DN 70) already after 55 + 20 mm accumulation height
  • Vacuum drainage at just 75 mm overall accumulation height (approved in accordance with EN 1253-2: 110 mm)
  • Reduced roof load due to lower accumulation height

Product information

  • High performance drainage with pressure flow
  • Made of stainless steel material grade 304 with functional part made of plastic
  • Corresponds with EN 1253-2
  • Suitable for installation in tested roofs according to Germand Standard DIN 18234-1/-2
  • As one-piece part for cold roofs or two-piece for hot roofs
  • Meets the requirements of German Standard DIN 1986-100 or EN 12056 for emergency drainage

Flat roof heating

Image
Suitable for
  • Flat roof gullies Jet/Spin series made of stainless steel
    • DN 40 – DN 125
  • Parapet wall gully Jet made of stainless steel
    • DN 50 – DN 70
  • Turboflow emergency gully made of stainless steel
    • DN 50 – DN 70
  • Flat roof gullies Passavant Spin made of cast iron
    • DN 70 – DN 100
Description
  • Mains connection: 220 – 240 V
  • Degree of protection: IP 67
  • Connection line
    • H05RN-F2x1,0
    • Length: 1 m
  • Height: 95 mm
  • Nominal power: 25 W
  • Weight: 0.3 kg

Flat roof heating with thermostat

Image
Suitable for
  • Flat roof gullies Jet/Spin series made of stainless steel
    • DN 40 – DN 125
  • Parapet wall gully Jet made of stainless steel
    • DN 50 – DN 70
  • Turboflow emergency gully made of stainless steel
    • DN 50 – DN 70
  • Flat roof gullies Passavant Spin made of cast iron
    • DN 70 – DN 100
Description
  • Mains connection: 220 – 240 V
  • Degree of protection: IP 67
  • Connection line
    • H05RN-F2x1,0
    • Length: 1 m
  • Height: 95 mm
  • Nominal power: 25 W
  • Weight: 0.3 kg

Insulation

Image
Suitable for
  • Turboflow gully body
    • DN 50
Description
  • For inlet/pipe sockets
  • Made of stone wool
  • Building material class A1
  • Weight: 0.4 kg

Insulation

Image
Suitable for
  • Jet/Spin series stainless steel flat roof gullies
    • Socket inclination: 90°
  • DN 70
Description
  • For inlet-/pipe sockets
  • Made of stone wool, building materials class A1
  • Weight: 0.8 kg

Flange seal

Image
Suitable for
  • Jet/Spin series stainless steel flat roof gullies
  • Attika Spin/Jet roof gullies
    • DN 50/DN 70
  • Multiflex flat roof ducts
    • DN 70/DN 100
Description
  • Thickness: 4 mm
  • EPDM
  • Weight: 0.2 kg

Flange seal

Image
Suitable for
  • Jet/Spin series stainless steel flat roof gullies
  • Attika Spin/Jet roof gullies
    • DN 50/DN 70
  • Multiflex flat roof ducts
    • DN 70/DN 100
Description
  • Thickness: 4 mm
  • Soft PVC
  • Weight: 0.3 kg

Flange seal

Image
Suitable for
  • Jet/Spin series stainless steel flat roof gullies
  • Attika Spin/Jet roof gullies
    • DN 50/DN 70
  • Multiflex flat roof ducts
    • DN 70/DN 100
Description
  • Thickness: 4 mm
  • NBR/SBR
  • Weight: 0.3 kg

Holder sheet for trapezoidal panel roof

Image
Suitable for
  • Jet flat roof gullies
    • DN 70/DN 100
    • Socket inclination: 90°
  • Spin flat roof gullies
    • DN 70 – DN 125
    • Socket inclination: 90°
  • Emergency gully Turboflow
    • DN 50/DN 70
Description
  • Made from galvanised steel sheet
  • Thickness: 1.5 mm
  • Weight: 3.6 kg
TOP