External bypass G-H / divider
Product benefits
- Option for drainage of large areas in combination with traditional separator technology
Product information
- Shaft divides the required amount of water that goes into the separator and bypass line
- Product body made of glass reinforced plastic
- Pipe connection using suitable push sockets or pipe connectors (no welded sockets)
- Suitable top sections
Top sections reduced (600) for grease separators
Top sections reduced for light oil separators
Top sections for GRP sampling units
Sampling units for GRP separators
ACO Belt 75 SS
Suitable for
7,5 m
Description
- Load strap: Polyester
- Tensioner and hooks: Stainless steel
- Package includes 2 pcs of anchors T10/150SS
- Usage for tanks dia ≤ 2.57 m
ACO Belt 120 SS
Suitable for
12 m
Description
- Load strap: Polyester
- Tensioner and hooks: Stainless steel
- Package includes 2 pcs of anchors T10/150SS
- Usage for tanks dia ≤ 2.57 m
Alarm device (OB)
Suitable for
Oil layer thickness and overflow
Description
- Monitoring device, 2x cable connections, oil level sensor, overflow sensor
- 3 kg
Alarm device (O)
Suitable for
Oil layer thickness
Description
- Monitoring device, cable connection, oil level sensor
- 1,1 kg
Alarm device (B)
Suitable for
Overflow
Description
- Monitoring device, cable connection, overflow sensor
- 1,1 kg
Alarm device (OB) + casing
Suitable for
Oil layer thickness and overflow, includes alarm device and casing
Description
- Monitoring device, 2x cable connections, oil level sensor, overflow sensor
- 3 kg
- Casing included
Control unit GA 1 + one sensor GA - SG1
Suitable for
GA-1 is an alarm device specially designed for grease separators. They indicate when it is time to empty the grease separator and thus prevents harmful grease emissions to the sewer system.
Description
- Dimensions: 125 mm x 75 mm x 35 mm (L x H x D
- Material: Polycarbonate
- Enclosure: IP65
- Operation temperature: -30 °C...+50 °C
- Supply voltage: 230 VAC ± 10 %, 50/60 Hz
- The device is not equipped with a mains switch
- Power consumption: GA-1: 5 VA, GA-2: 5 VA
- Sensors: 1 or 2 GA-SG1 sensors
- Relay outputs: Potential-free relay output 250 V, 5 A
- 1 pcs for GA-1 Operational delay 10 sec. Relay de-energize
- 2 pcs for GA-2 at trigger point.
- Electrical safety: IEC/EN 61010-1, Class II , CAT II
- EMC: IEC/EN 61000-6-3 (Emission)
- IEC/EN 61000-6-1 (Immunity)
Control unit GA 2 + two senzors GA - SG1
Suitable for
GA-2 is an alarm device for monitoring the thickness of the grease layer accumulating in a grease interceptor and the blocking of the interceptor. The system consists of a GA-2 control unit, two GA-SG1 sensors and a cable joint.
Description
- Dimensions 125 mm x 75 mm x 35 mm (L x H x D)
- Package 1,2 kg (control unit + 2 sensors + cable joint)
- Enclosure IP 65, material polycarbonate
- Cable glands adjustment range 6-10 mm
- Operation temperature -30 ºC...+50 ºC
- Supply voltage 230 VAC ± 10 %, 50/60 Hz
- The device is not equipped with a mains switch
- Power consumption 5 VA
- Sensors 2 pcs GA-SG1 sensors
- Relay output 2 pcs potential-free relay outputs
- 250 V, 5 A Operational delay 10 sec.
- Relay de-energize at trigger point.
- Electrical safety IEC/EN 61010-1, Class II , CAT II
- EMC Emission IEC/EN 61000-6-3
- Immunity IEC/EN 61000-6-1
Alarm Device Casing
Suitable for
For installation the monitoring device outside an explosion hazard area
Description
Casing for alarm device (OB, O, B)