Upstream tank plant - duo
Product benefits
- Low turbulence wastewater supply to grease separator plant thanks to displacement pumps
- Compact construction
- Low energy consumption
- Secure level regulation thanks to use of air bubble injection
Product information
- Areas of application
- Operation over sizeable distances between water point of incidence and grease separator plant
- Low inlet connection for grease separator
- Polyethylene container
- 1 x maintenance opening for simple maintenance (350 mm width clearance) with odour proof screw-on cover
- Fixing kit for buoyancy-proof anchorage
- Strainer insert to match inflow
- 1 x horizontal inflow sockets
- DN 100, Ø110 (types 2 + 4)
- DN 150, Ø160 (types 7 + 10)
- DN 200, Ø200 (types 15 + 20)
- 2x horizontal blank flange
- DN 100 (types 2 + 4)
- DN 150 (types 7 + 10)
- 1x vertical socket DN 100 (ventilation)
- 2 x eccentric screw pumps
- Gear motor 400 V, 50 Hz
- IP 55 protection
- Integrated thermal monitoring
- Integrated flow volume monitoring
- 10 m mains cable
- Extension pressure line
- Special encased ball backflow stop, presented as a Y-branch pipe (with integrated venting and fixing screws)
- Special mounting adaptor for elastic connection of the DN 100 pressure pipe (pipe external diameter: Diameter 108 – 114.3 mm/optional DN 80)
- Level switching
- Pneumatic level switching with 10 m control line
- With air bubble injection via a mini compressor
- Controls
- IP 54 protection
- 1.5 m cable and EEC plug (32 A)
- Mains-free group fault and operational messages
| Type | Dimensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Height of inflow | L1 | L2 | L3 | L4 | B | H1 | H2 | H3 | H4 | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | |
| 2 | 355 | 1585 | 1745 | 1500 | 45 | 820 | 1330 | 940 | 645 | 540 |
| 4 | 355 | 1585 | 1745 | 1500 | 45 | 820 | 1330 | 940 | 645 | 540 |
| 7 | 380 | 1585 | 1745 | 1500 | 45 | 820 | 1330 | 940 | 645 | 540 |
| 10 | 380 | 1885 | 2020 | 1800 | 25 | 820 | 1340 | 940 | 650 | 540 |
| 15 | 450 | 1885 | 2020 | 1800 | 20 | 940 | 1420 | 1035 | 730 | 630 |
| 20 | 450 | 1885 | 2260 | 1800 | 240 | 940 | 1460 | 1035 | 730 | 630 |
Flashing light
Suitable for
- Signalling unit with voltage-free fault reporting
- LipuSmart-P
- Muli-Max with signalling unit
- LipuLift-P
Description
- 230V
- Power consumption: 70 mA
- Weight: 0.5 kg
Flashing light
Message system with GSM module
Suitable for
- All grease separators
- Grease layer thickness measuring device
- Pre-tank plants
- Technical processing systems
- Quatrix-K backflow preventer type 3F
- Sinkamat-K (underfloor) duo
- Muli lifting units
- Pumping stations
- Installation sets
Description
- Parameter via app (Android & iOs)
- Mains-independent alarm via 12V lead-gel battery
- Optical and acoustic alarm message
- Freely configurable inputs
- 6 digital inputs with LED status display
- 1 analogue
- 1 alarm output 12 V
- Alarm forwarding via SMS to mobile phones
- For mounting outside the hazardous area
- Housing: 192 x 150(with cable gland) x 100 mm (WxHxD)
- Protective doctor: IP54
- Operating voltage: 230 V/AC 50/60 Hz
- Translated with www.DeepL.com/Translator (free version)
- Weight: 2 kg
Signalling unit
Suitable for
- Faecal matter backflow automatic stop Quatrix-K type 3F
- All Muli wastewater lifting plants
- Upstream tank plant mono/duo
- Muli-Max
- Sinkamat –K/-KD
- Sinkamat-Z
- Sinkamat-Z (underfloor)
- Duo
- LipuLift-P
Description
- Self-charging
- With floating contact
- Visual and acoustic
- Without contact transmitter
- For mounting outside the potentially explosive atmosphere
- Dimensions: 175 x 125 x 75 mm W x H x D
- Protection type: IP65
- Operating voltage: 230 V/AC 50/60 Hz
- Ready to plug in with cable: 2 m
- Weight: 1.4 kg
Signal horn
Suitable for
- Signalling unit
- Signalling unit with GSM module
Description
- Operating voltage: 12V DC
- Power consumption: 30 mA
- 62 x 62 x 85 mm (LxWxD)
- Degree of protection: IP66
- Noise level: 95 dB(A)
- Weight: 0.2 kg
Signal horn
Suitable for
- Signalling unit with voltage-free fault reporting
- LipuSmart-P
- Muli-Max with signalling unit
- LipuLift-P
Description
- 230V AC
- Power consumption: 30mA
- Ø62x85 mm (L/B x T)
- Protection: IP66
- 95 dB(A)
- Weight: 0.3 kg
Connection and flood module set
Suitable for
- Triplex-K backflow stops
- DN 100 – DN 150
- Quatrix-K backflow stops
- All wastewater lifting plants
- All separators
Description
- To report a leak caused for example by a pipe bursting
- For electrically conducting liquids
- With volt free contact
- Visible and audible alarms (approx. 80 dB)
- Dimensions (width x height x depth): 160 x 120 x 75 mm
- Protection level: IP 65
- Operating voltage: 230 V/AC 50/60 Hz
- Plug and use: 1.4 m
- Overflow indicator with 10 m cable
- Weight: 1.1 kg
Inlet valve DN 100
Suitable for
- Wastewater lifting plant
- Polyethylene grease separator
- Polyethylene starch separator
- Upstream tank plant
- Typ 2 and 4
- LipuMobil-P – Type 0.5
Description
- Made of PVC
- 110 mm push socket on both sides with rim sealing ring
- Overall dimensions: 176 x 330 mm (L x H)
- Weight: 3.1 kg
Inlet valve DN 100
Suitable for
- Grease separator made of polyethylene
- Starch separator made of polyethylene
- Upstream tank systems type 2 and 4
- LipuMobil – type 0.5
Description
- Made out of PVC
- Spigot Ø110 on both sides for sleeveless pipe systems made of cast iron or plastic
- Total dimensions: 176 x 360 mm (L x H)
- Weight: 5.9 kg
Inlet valve DN 150
Suitable for
- Wastewater lifting plant
- Polyethylene grease separator
- Polyethylene starch separator
- Upstream tank plant
- Type 7 – Type 10
Description
- Made of PVC
- 160 mm push socket on both sides with rim sealing ring
- Overall dimensions: 226 x 510 mm (L x H)
- Weight: 7 kg
Inlet valve DN 150
Suitable for
- Grease separator made of polyethylene
- Starch separator made of polyethylene
- Upstream tank systems type 7 to 10
Description
- Made out of PVC
- Spigot Ø110 on both sides for sleeveless pipe systems made of cast iron or plastic
- Total dimensions: 226 x 420 mm (L x H)
- Weight: 10.2 kg
Connection ports
Suitable for
- Upstream tank plant-duo
- Type 2 – Type 7
Description
- Nominal width: DN 100
- For connection of additional pipes
- Weight: 1.2 kg
Connection ports
Suitable for
- Upstream tank plant-duo
- Type 2 – Type 7
Description
- Nominal width: DN 150
- For connection of additional pipes
- Weight: 1.6 kg
Connection ports
Suitable for
- Upstream tank plant-duo
- Type 10
Description
- Nominal width: DN 150
- For connection of additional pipes
- Weight: 4 kg
Sealing ring
Suitable for
- LipuSmart-P
- Powerlift installation kit DN 100
- Fäkablock II
- All Muli wastewater lifting plants
Description
- As additional component for pressure line DN 80
- Weight: 0.3 kg