Grease separator Lipator-S-RA extension stage 3
Product information
- Grease separator plant according to EN 1825 for free-standing installation in frost proof rooms
- Manufactured of stainless steel, material grade 316
- With automated grease and sludge extraction
- With hoses and four tanks 60 liters for grease and sludge collection
- With heating rod and timer clock for homogenizing of grease
- With agitating device; slow running agitator with scrapers in the upper cone
- Electric connection: 230 V, 50/60 Hz
| Nominal size | Dimensions | |||||
|---|---|---|---|---|---|---|
| L | L1 | L2 | H | H1 | H2 | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | |
| NS 2 | 1170 | 640 | 970 | 1700 | 1300 | 1230 |
| NS 4 | 1240 | 980 | 1300 | 1850 | 1400 | 1330 |
| NS 10 | 1710 | 1500 | 1670 | 2200 | 1800 | 1730 |
| NS 20 | 1950 | 1750 | 1880 | 2320 | 1900 | 1830 |
| NS 25 | 1950 | 1750 | 1880 | 2420 | 2000 | 1930 |
Smell neutralisation
Suitable for
- Grease separators (incl. external makes)
Description
- Lockable control cabinet
- From stainless steel, material grade 304
- Ground surface
- With side ventilation slots
- Integrated timer
- Incl. odour neutralisers: 9 l
- With dosing pump for reliable discharge
- Chemical resistant dosing hose
- Signal column for status monitoring
- PG gland for on-site connection
- Control cabinet dimensions: 380 x 600 x 210 mm (W x H x D)
- System ready to plug in
- Incl. cable: 1.5 m
- 230 V socket to be produced on-site
- Weight: 36.2 kg
7980.90.00: ACO Ozone-System
Suitable for
- Grease separators, indoors
- Grease separators, outdoors
- Lifting stations
- Pumping stations
Description
- ACO Ozone minimizes odors that can arise from grease seperators, lifting plants and pumping stations
- Material: acid-resistant stainless steel
Consists:
- ACO Ozone - ozone generator
- Size (L x W x H): 270 x 100 x 85 mm
- Nominal voltage 230 V / 50 Hz
- Degree of protection IP20
- ACO Ozone pump - feed pump
- Size (L x W x H): 160 x 90 x 90 mm
- Integrated filter
- Nominal voltage 230 V / 50 Hz
- Degree of protection IP54
- ACO Ozone bracket - wall bracket
- Size (L x W x H): 295 x 110 x 90 mm
- Hoses
Message system with GSM module
Suitable for
- All grease separators
- Grease layer thickness measuring device
- Pre-tank plants
- Technical processing systems
- Quatrix-K backflow preventer type 3F
- Sinkamat-K (underfloor) duo
- Muli lifting units
- Pumping stations
- Installation sets
Description
- Parameter via app (Android & iOs)
- Mains-independent alarm via 12V lead-gel battery
- Optical and acoustic alarm message
- Freely configurable inputs
- 6 digital inputs with LED status display
- 1 analogue
- 1 alarm output 12 V
- Alarm forwarding via SMS to mobile phones
- For mounting outside the hazardous area
- Housing: 192 x 150(with cable gland) x 100 mm (WxHxD)
- Protective doctor: IP54
- Operating voltage: 230 V/AC 50/60 Hz
- Translated with www.DeepL.com/Translator (free version)
- Weight: 2 kg
Sampling pot DN 100
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 1 – 4
- Starch separator FapuJet-S
- NS 0.5 – 1
- Light oil separator Coalisator-R/-RD
- NS 3
Description
- Stainless steel, material grade 316
- Round shape
- Gradient drop: 70 mm
- For installation in DN 100 horizontal pipes coming from grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 9.9 kg
Sampling pot DN 150
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 5.5 – 10
- Starch separator FapuJet-S
- NS 2
- Light oil separator Coalisator-R/-RD
- NS 6 – 10
Description
- Stainless steel, material grade 316
- Round shape
- Gradient drop: 70 mm
- For installation in DN 150 horizontal pipes coming from grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 12.2 kg
Sampling pot DN 200
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 15 – 20
- Light oil separator Coalisator-E
- NS 20
Description
- Stainless steel, material grade 316
- Round shape
- Gradient drop: 70 mm
- For installation in DN 200 horizontal pipes coming from grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 13.1 kg
Coarse trap DN 100
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 1 – 4
- Starch separator FapuJet-S
- NS 0.5 – 1
Description
- Stainless steel, material grade 316
- Round shape
- Gradient drop: 70 mm
- For installation in DN 100 vertical pipes going to grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 11 kg
Coarse trap DN 150
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 5.5 – 10
- Starch separator FapuJet-S
- NS 2
Description
- Stainless steel, material grade 316
- Round shape
- Gradient drop: 70 mm
- For installation in DN 150 vertical pipes going to grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 13.4 kg
Coarse trap DN 200
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 15 – 20
Description
- Stainless steel, material grade 316
- Round shape
- Gradient drop: 70 mm
- For installation in DN 200 vertical pipes going to grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 14.3 kg
Sampling pot DN 100
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 1 – 4
- Starch separator FapuJet-S
- NS 0.5 – 1
- Light oil separator Coalisator-R/-RD
- NS 3
Description
- Stainless steel, material grade 316
- Round shape
- For installation in DN 100 vertical pipes coming from grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 9.5 kg
Sampling pot DN 150
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 5.5 – 10
- Starch separator FapuJet-S
- NS 2
- Light oil separator Coalisator-R/-RD
- NS 6 – 10
Description
- Stainless steel, material grade 316
- Round shape
- For installation in DN 150 vertical pipes coming from grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 11.3 kg
Sampling pot DN 200
Suitable for
- Grease separator LipuJet-S/Lipator-S
- NS 15 – 20
- Light oil separator Coalisator-E
- NS 20
Description
- Made from stainless steel, material grade 304
- Round shape
- For installation in DN 200 vertical pipes coming from grease separator
- With EC connector and claw
- Connections tested to DIN EN 877
- Weight: 11 kg
Coarse trap DN 100
Suitable for
- Grease separator Lipator-P/Lipator-S
- NS 2 – 4
Description
- Coarse trap, PE
- With cone and penstock
- Housing 480 mm
- Drainage connection
- With stop valve
- Ventilation connection DN 20 for venting the on-site collecting tank
- Cover with clamping ring odourproof
- Tabs for ceiling fixing on site
- Weight: 13.6 kg
Coarse trap DN 150
Suitable for
- Grease separator Lipator-P/Lipator-S
- NS 10
Description
- Coarse trap, PE
- With cone and penstock
- Housing 480 mm
- Drainage connection
- With stop valve
- Ventilation connection DN 20 for venting the on-site collecting tank
- Cover with clamping ring odourproof
- Tabs for ceiling fixing on site
- Weight: 14.2 kg
Coarse trap DN 200
Suitable for
- Grease separator Lipator-P/Lipator-S
- NS 20 - 25
Description
- Coarse trap, PE
- With cone and penstock
- Housing 480 mm
- Drainage connection
- With stop valve
- Ventilation connection DN 20 for venting the on-site collecting tank
- Cover with clamping ring odourproof
- Tabs for ceiling fixing on site
- Weight: 14.7 kg
PIPE connection set ND 100 for Grease Separators
Suitable for
- Grease separator LipuJet/LipuSmart for free-standing installation
- NS 1-4
Description
- For connection of the grease separator feed line
- From stainless steel, material grade 316 L
- EPDM seal
- DN 100
- 2 x bends 45°
- 1 x intermediate piece 250 mm
- 1 x calm region 1000 mm
- Weight: 5.2 kg
PIPE connection set ND 150 for Grease Separators
Suitable for
- Grease separator LipuJet/LipuSmart for free-standing installation
- NS 5.5-10
Description
- For connection of the grease separator feed line
- From stainless steel, material grade 316 L
- EPDM seal
- DN 150
- 2 x bends 45°
- 1 x intermediate piece 250 mm
- 1 x calm region 1500 mm
- Weight: 12.7 kg
PIPE connection set ND 200 for Grease Separators
Suitable for
- Grease separator LipuJet for free-standing installation
- NS 15-25
Description
- For connection of the grease separator feed line
- From stainless steel, material grade 316 L
- EPDM seal
- DN 200
- 2 x bends 45°
- 1 x intermediate piece 500 mm
- 1 x calm region 2000 mm
- Weight: 25 kg
Set replacement drums
Suitable for
- Grease separator Lipator-P/Lipator-S
- NS 2 – 25
Description
- 2 complet drums
- 2 drums, complete with hoses
- Capacity 60 liters with Plexiglas cover
- Clamping ring and hose connection DN 25 and DN 40,
- 2 hoses DN 25 (length 2,500 mm) and 2 hoses DN 400 (1,500 mm length)
- 2 replacement drums
- 60 liters with cover and clamping ring only
- Weight: 27 kg
Replacement drum
Suitable for
- Grease separators Lipator-P/Lipator-S
- LipuMobil-P 0,8
Description
- Drum
- Volume: 60 l
- With lid and tension ring
- Height: approx. 630 mm
- Diameter: approx. 380 mm
- Weight: 5 kg
Operating Logbook
Suitable for
- Grease separator
- For underground installation
- For free-standing installation
Description
- Contents: Check-list and standard forms to document in-house monitoring, maintenance and disposal relating to the plant as required by DIN 4040-100
- Format: A4 with double filing rings
- Size: 60 pages
- Laid out to cover 5 years
- Weight: 0.3 kg
Service grease separator: commissioning
Suitable for
- ACO grease separator for free-standing installation
Description
Commissioning includes the following services:
- Arrival and removal including working hours, which do not exceed the scope of the commissioning
- Installation check
- Electrical testing
- Mechanical testing
- System parameterisation
- Multiple trial runs
- Operating personnel induction
- Creation of a commissioning checklist
Upon conclusion of an original ACO maintenance contract, the costs of
commissioning will be offset with the first maintenance service!
Further information: ACO Service 036965/ 819-444
Service grease separator: maintenance
Suitable for
- ACO grease separator for free-standing installation
- One contract per grease separator
Description
- Maintenance in accordance with the checklist based on EN 1825-2 when concluding a maintenance contract with ACO Building Drainage.
- Separator systems should be maintained by an authorised qualified contractor
- The maintenance interval should not be longer than 1 x year.
The maintenance service includes the following work:
- Arrival and removal including working hours, which do not exceed the scope of the maintenance
- Checking internal wall surfaces
- Functional check on electrical equipment, if available
- Checking the entire system with the creation of a test report and, if necessary, a repair offer
A disposal vehicle should be available at the time of maintenance.
Further information: ACO Service 036965/ 819-444
Service grease separator: General inspection
Suitable for
- ACO grease separator for free-standing installation
Description
According to DIN 4040-100, separator systems must be checked before commissioning and then at regular intervals of a maximum of 5 years after full emptying.
Testing takes place according to EN 1825 / EN 1610.
Our report includes the exact description of the system with measurement, measurement graphics and image documentation, as well as suggestions for further procedures (defect elimination).
The following preparations must be made on-site before the general inspection:
- Free access for all vehicles
- Full installation of the system
- Electrical connection 230V
- The system must be emptied and clean at the time of testing
- The possibility of quick water filling is required (supply of fresh water by the disposer or C-connection)
- An assistant will be provided to us free-of-charge for the work
- You shall provide climbing aids (ladders)
- The contents of the separator must be disposed of on the day of the general inspection! Disposal is ordered by the customer, unless otherwise expressly agreed.
- For the duration of the General Inspection, no inlet into the separator may take place for approx. 4-5 hours
Further information: ACO Service 036965/ 819-444