Grease separator LipuJet-P-OAP extension stage 3
Product benefits
- With two inspection windows for sludge and grease control
- With two high pressure spray heads for perfect inner body cleaning
- Disposal pump for maximum lift heights up to 18 meters with 10 m3/h disposal performance
- Control unit with presets and flexible adjustments (cleaning and filling times)
Product information
- Grease separator according to EN 1825 for installation inside frost-free rooms
- Manufactured of polyethylene in oval shape
- Two covers odour-proof ∅ 450 mm
- Inlet and outlet ∅ 200 mm (NS 15 – 25) or ∅ 250 mm (NS 30)
- Automatically operated disposal pump (3,4 kW) with shut-off valve, disposal connection ∅ 75 mm with Storz-B coupling R 2½"
- Two automatically operated high pressure pumps (4,2 kW each) and connection high pressure spray heads (150 bar) for combined mixing of the content and cleaning of the tank
- Automatically operated filling device R ¾” via solenoid valve
- 400 V / 50 (60) Hz / 32 A / 11,8 kW
- Two inspection windows with wiper
- Operating side left or right

Inlet valve DN 200
Grease layer thickness measuring device
Suitable for
- LipuJet-P
- Oval NS 1 – 10
- Round NS 2 – 20
- LipuJet-S
- Oval NS 1 – 10
- Round NS 2 – 20
- LipuSmart-P
- Oval NS 1 – 10
Description
- For electronic measurement of layer of grease
- Suitable for liquid and/or congealing grease
- Measuring device with plug and used connecting cable, length: 3 m
- With two voltage-free changeover contacts to display full warning (80%) and advance warning of fill level (50%)
- With visual display of fill level
- With heated probe rod to increase reliability of operation
- Operating voltage: 230VAC/5 VA
- Max consumption approx. 12W
- Weight: 2.8 kg
Connection box
Suitable for
- Grease separator
- Starch separators
- LipuLift-P-D/-DA/-DAP
Description
- For disposal connection, pendulum gas line (if necessary) and remote control
- From stainless steel, material grade 304
- "Surface mounted” version
- Glass beaded front
- Lockable door, left limit stop
- Dimensions W x H x D: 300 x 725 x 160 mm
- Weight: 10 kg
In-wall frame
7980.90.00: ACO Ozone-System
Suitable for
- Grease separators, indoors
- Grease separators, outdoors
- Lifting stations
- Pumping stations
Description
- ACO Ozone minimizes odors that can arise from grease seperators, lifting plants and pumping stations
- Material: acid-resistant stainless steel
Consists:
- ACO Ozone - ozone generator
- Size (L x W x H): 270 x 100 x 85 mm
- Nominal voltage 230 V / 50 Hz
- Degree of protection IP20
- ACO Ozone pump - feed pump
- Size (L x W x H): 160 x 90 x 90 mm
- Integrated filter
- Nominal voltage 230 V / 50 Hz
- Degree of protection IP54
- ACO Ozone bracket - wall bracket
- Size (L x W x H): 295 x 110 x 90 mm
- Hoses
Grease layer thickness measuring device Multi Control
Suitable for
- LipuJet-P
- Oval NS 1 – NS 30
- Round NS 2 – NS 20
- LipuJet-S
- Oval NS 1 – NS 10
- Round NS 2 – NS 20
- LipuSmart-P
- Oval NS 1 – 10
Description
- To determine the disposal intervals of grease separators
- Suitable for liquid and/or harden fats
- Delineation with colour-touchpanel
- With integrated SD-card (4GB) for recording of the measuring process
- With headed sounding stick (temperature is adjustable) to increase the operation safety
- Three free of potential contacts for outoput of pre-alarm (adjustable), full-alarm (adjustable) and error
- Measuring stick with adjusting scale
- Delineation with plug-in cable connection, 3 m
- Service voltage: 100 240VAC 50/60 Hz, 2 A
- Power: ca. 43 W
- Weight: 2.7 kg
Heating rod
Sampling pot DN 200
Sampling pot DN 200
Coarse trap DN 200
Suitable for
- Grease separator LipuJet-P
- NS 15 – 20
Description
- For installation in vertical pipes DN 200 going to grease separator
- Round shape with
- Coupling socket seal (material SBR) on inlet and spigot on outflow
- Basket made from stainless steel, material grade 316 to retain coarse substances
- Odour-proof maintenance opening DN 450
- Weight: 9.9 kg
Connection box
Storz coupling for swinging gas lines
In-wall frame
Connection box
Suitable for
- Grease separators
- LipuMax-P-D/DM/DA
- LipuJet-P-OD/RD/SD/OM/OMP/RM/RMP
- LipuJet-S-OD/RD/SD/OM/OMP/RM/RMP
- Stach seperators FapuMax-P-DA
- Oil separators Coalisator-P
- LipuLift-P-D/-DA/-DAP
Description
- For evacuation connection DN 80
- Made from stainless steel, material grade 304
- "On wall" version
- Door stop
- Choice of left or right
- Lockable door
- Dimensions (width x height x depth): 370 x 330 x 250 mm
- Weight: 10.4 kg
PIPE connection set ND 100 for Grease Separators
PIPE connection set ND 150 for Grease Separators
PIPE connection set ND 200 for Grease Separators
Message system with GSM module
Suitable for
- All grease separators
- Grease layer thickness measuring device
- Pre-tank plants
- Technical processing systems
- Quatrix-K backflow preventer type 3F
- Sinkamat-K (underfloor) duo
- Muli lifting units
- Pumping stations
- Installation sets
Description
- Parameter via app (Android & iOs)
- Mains-independent alarm via 12V lead-gel battery
- Optical and acoustic alarm message
- Freely configurable inputs
- 6 digital inputs with LED status display
- 1 analogue
- 1 alarm output 12 V
- Alarm forwarding via SMS to mobile phones
- For mounting outside the hazardous area
- Housing: 192 x 150(with cable gland) x 100 mm (WxHxD)
- Protective doctor: IP54
- Operating voltage: 230 V/AC 50/60 Hz
- Translated with www.DeepL.com/Translator (free version)
- Weight: 2 kg
Smell neutralisation
Suitable for
- Grease separators (incl. external makes)
Description
- Lockable control cabinet
- From stainless steel, material grade 304
- Ground surface
- With side ventilation slots
- Integrated timer
- Incl. odour neutralisers: 9 l
- With dosing pump for reliable discharge
- Chemical resistant dosing hose
- Signal column for status monitoring
- PG gland for on-site connection
- Control cabinet dimensions: 380 x 600 x 210 mm (W x H x D)
- System ready to plug in
- Incl. cable: 1.5 m
- 230 V socket to be produced on-site
- Weight: 36.2 kg
Remote control
Service grease separator: commissioning
Suitable for
- ACO grease separator for free-standing installation
Description
Commissioning includes the following services:
- Arrival and removal including working hours, which do not exceed the scope of the commissioning
- Installation check
- Electrical testing
- Mechanical testing
- System parameterisation
- Multiple trial runs
- Operating personnel induction
- Creation of a commissioning checklist
Upon conclusion of an original ACO maintenance contract, the costs of
commissioning will be offset with the first maintenance service!
Further information: ACO Service 036965/ 819-444
Service grease separator: maintenance
Suitable for
- ACO grease separator for free-standing installation
- One contract per grease separator
Description
- Maintenance in accordance with the checklist based on EN 1825-2 when concluding a maintenance contract with ACO Building Drainage.
- Separator systems should be maintained by an authorised qualified contractor
- The maintenance interval should not be longer than 1 x year.
The maintenance service includes the following work:
- Arrival and removal including working hours, which do not exceed the scope of the maintenance
- Checking internal wall surfaces
- Functional check on electrical equipment, if available
- Checking the entire system with the creation of a test report and, if necessary, a repair offer
A disposal vehicle should be available at the time of maintenance.
Further information: ACO Service 036965/ 819-444
Service grease separator: General inspection
Suitable for
- ACO grease separator for free-standing installation
Description
According to DIN 4040-100, separator systems must be checked before commissioning and then at regular intervals of a maximum of 5 years after full emptying.
Testing takes place according to EN 1825 / EN 1610.
Our report includes the exact description of the system with measurement, measurement graphics and image documentation, as well as suggestions for further procedures (defect elimination).
The following preparations must be made on-site before the general inspection:
- Free access for all vehicles
- Full installation of the system
- Electrical connection 230V
- The system must be emptied and clean at the time of testing
- The possibility of quick water filling is required (supply of fresh water by the disposer or C-connection)
- An assistant will be provided to us free-of-charge for the work
- You shall provide climbing aids (ladders)
- The contents of the separator must be disposed of on the day of the general inspection! Disposal is ordered by the customer, unless otherwise expressly agreed.
- For the duration of the General Inspection, no inlet into the separator may take place for approx. 4-5 hours
Further information: ACO Service 036965/ 819-444