Lipumax G-H

Product benefits
- Simple to install, space efficient
- Top section with odour proof sealed cover
- Including rubber seal ring for connection with cover plate
Product information
- Tank made of glass reinforced plastic
- With integrated sludge trap
- One-piece construction

Top sections reduced (600) for grease separators

Top sections for GRP sampling units

Sampling units for GRP separators
ACO Belt 75 SS
ACO Belt 120 SS
Control unit GA 1 + one sensor GA - SG1
Suitable for
GA-1 is an alarm device specially designed for grease separators. They indicate when it is time to empty the grease separator and thus prevents harmful grease emissions to the sewer system.
Description
- Dimensions: 125 mm x 75 mm x 35 mm (L x H x D
- Material: Polycarbonate
- Enclosure: IP65
- Operation temperature: -30 °C...+50 °C
- Supply voltage: 230 VAC ± 10 %, 50/60 Hz
- The device is not equipped with a mains switch
- Power consumption: GA-1: 5 VA, GA-2: 5 VA
- Sensors: 1 or 2 GA-SG1 sensors
- Relay outputs: Potential-free relay output 250 V, 5 A
- 1 pcs for GA-1 Operational delay 10 sec. Relay de-energize
- 2 pcs for GA-2 at trigger point.
- Electrical safety: IEC/EN 61010-1, Class II , CAT II
- EMC: IEC/EN 61000-6-3 (Emission)
- IEC/EN 61000-6-1 (Immunity)
Control unit GA 2 + two senzors GA - SG1
Suitable for
GA-2 is an alarm device for monitoring the thickness of the grease layer accumulating in a grease interceptor and the blocking of the interceptor. The system consists of a GA-2 control unit, two GA-SG1 sensors and a cable joint.
Description
- Dimensions 125 mm x 75 mm x 35 mm (L x H x D)
- Package 1,2 kg (control unit + 2 sensors + cable joint)
- Enclosure IP 65, material polycarbonate
- Cable glands adjustment range 6-10 mm
- Operation temperature -30 ºC...+50 ºC
- Supply voltage 230 VAC ± 10 %, 50/60 Hz
- The device is not equipped with a mains switch
- Power consumption 5 VA
- Sensors 2 pcs GA-SG1 sensors
- Relay output 2 pcs potential-free relay outputs
- 250 V, 5 A Operational delay 10 sec.
- Relay de-energize at trigger point.
- Electrical safety IEC/EN 61010-1, Class II , CAT II
- EMC Emission IEC/EN 61000-6-3
- Immunity IEC/EN 61000-6-1