LipuMax-PF-H-DA Stage 3

Grease separator

• Grease separator in accordance with EN 1825 Nominal Size 10 and 15
• For underground installation
• With integrated sludge trap
• 2 x maintenance openings Ø 840 mm for the respective accommodation of a required extension system characteristic dimension 800 or 800 - 600 (accessories) with load classes A 15, B 125 or D 400
• Maximum inflow depth ZT up to approx. 1.10 m (distance from top edge of ground to lower edge of connection nozzle/ pipe invert)
• Maximum installation depth ET up to 3 m (distance from top edge of ground to lower edge of tank)
• Buoyancy safety of the tank: Buoyancy-proof up to 1.65 m above the lower edge of the tank with extension system and load distribution plate (for A 15, B 125 / D 400)
• Control unit for frost-free installation with connecting cable 1.5 m and CEE plug 16 A including phase inverter, protection class IP 54
• Remote control for frost-free installation, protection class IP 54
• Declaration of Performance (DoP) No: BD/G1/-1024
• Internal jetting:
  • High-pressure spray head (360° cleaning) with connection cable 30 m ††
  • HP (high pressure) pump (nominal pressure 175 bar) with reservoir for frost-free installation
  • High-pressure hose 2.7 m long for connecting HP pump and filling line connection
  • Required high-pressure hose (accessories) 10, 20 or 30 m long for connecting the high-pressure spray head and the filling line.
• Filling unit (components with DVGW and KIWA approvals) for frost-free installation for automatic refilling:
  • Free-flow valve
  • Pressure reducer with dirt traps
  • Solenoid valve
  • Pipe elbow
• Connection parts for on-site disposal line:
  • 1x Compression fitting DN 80/ 65 (OD 90/ 75 mm)
  • 1 x Compression fitting DN 65 (OD 75 mm)
  • Pipe (OD 75 mm) with fixed coupling Storz-B / 2½" and blind coupling
• Connection parts for on-site filling, supply (cable conduit) and vent stacks:
  • 3 x Socket seal DN 100
  • 1 x Cable gland
  • Pipe branch

Connections

• Pipe connections:
• Horizontal pipe socket DN 150 / OD 160 mm (NS 10) or DN 200 / OD 200 mm (NS 15) for on-site supply line
• Horizontal pipe socket DN 150 / OD 160 mm (NS 10) or DN 200 / OD 200 mm (NS 15) for on-site drain line
• 8 x horizontal pipe sockets (closed) DN 100 / OD 110 mm for on-site filling, supply (cable conduit) and ventilation lines
• 1 horizontal pipe socket each (closed) DN 80 / OD 90 mm arranged on the right and left in the direction of flow for on-site disposal line
• Water connections (30 l/min):
  • Internal thread ¾" on filling unit for on-site cold water line
  • External thread ¾" on the storage tank HP pump for on-site cold water line
• Electrical connection:
  • 400 V / 50 Hz / 4.2 kW
  • General fuse protection: 3 x 16 A (time lag) or according to local conditions.
  • The power supply must comply with the directives of the local power supplier. Particular attention should be paid to the specific protection measures and the cable cross-sections and potential compensation.