LipuLift-PF-DA Stage 3

Product benefits

  • Separator, sampling and pump station in one housing
  • No piping between the components necessary
  • Only one plant control
  • Optimal air exchange due to interruption of the partition wall between separator and pump station
  • High effective volume of the pumping station for low pump wear
  • Four comfort stages possible

Product information

  • Grease separator according to EN 1825-1 made of polyethylene for underground installation with integrated dual pumping station according to EN 12050
  • Flexible version for variable inlet inverts
  • Two dome openings, each to accommodate a top section with covers according to either class A, B or D
  • Integrated pumping station according to EN 12050, accessible via the manhole cover
    • Pressure connection: 2 "- OD Ø 63 mm (PE pipe)
    • Ball backflow preventer
    • Voltage: 400 V, 50 Hz, speed: 2900 rpm
    • Protection class IP 68; Operating mode: 51
  • With a factory-prepared suction line made of PE-HD DN 65 (OD 75 mm), with Storz-B coupling and blind cover
  • With factory-prepared automatic high-pressure internal cleaning
  • Disposal, cleaning and refilling of the separator with closed covers

Infobox

Buoyancy protection

  • Load class A15 and B125
    • Container buoyancy-proof from the container bottom up to a height of 1,650 mm (load class A15 and B125) with on-site concrete slab
  • Load class D400
    • Container buoyancy-proof from the container bottom up to a height of 1,650 mm (load class D400) with a concrete load distribution plate to be created on site

Please note

  • For the functionality of the pumping station, you can choose between the pressure sensors 0178.63.87 or 0178.63.88
Nominal sizeNominal widthContentsKey data pump unitItem

number
DownloadsRemember
Sludge trapGrease storeOverallTypeUsable volumeDelivery head
[l][l][l][l][m]
NS 4110 mm5903701260Sat-100/D66011.83204.30.31
NS 7160 mm7805501760Sat-100/D66011.83207.30.31
Sat-150/D66015.53207.30.32
NS 10160 mm10107102260Sat-150/D66015.53210.30.32
Sat‑200/D66017.53210.30.33
Nominal sizeNominal widthContentsKey data pump unitItem

number
Sludge trapGrease storeOverallTypeUsable volume
NS 4110 mm590 l370 l1260 lSat-100/D660 l3204.30.31
NS 7160 mm780 l550 l1760 lSat-100/D660 l3207.30.31
NS 7160 mm780 l550 l1760 lSat-150/D660 l3207.30.32
NS 10160 mm1010 l710 l2260 lSat-150/D660 l3210.30.32
NS 10160 mm1010 l710 l2260 lSat‑200/D660 l3210.30.33
Nominal sizeDimensions
L1L2H1
[mm][mm][mm]
NS 4277015001125
NS 7326019901100
NS 10375024801100
Characteristic curve
TypeDelivery headDelivery flow Q with overall delivery head HMedia temperature
2 m4 m6 m8 m10 m12 m14 m16 m18 mNormalMaximum
[m][l/s][l/s][l/s][l/s][l/s][l/s][l/s][l/s][l/s][°C][°C]
Sat-100/D2 – 11.89.58.57.35.94.01.04065
Sat-100/D
Sat-150/D2 – 15.511.911.110.08.87.55.93.70.74065
Sat-150/D
Sat‑200/D2 – 17.513.012.111.310.49.27.75.93.50.84065
Image

Pressure pick-up

Image
Suitable for
  • Control ACO Multi-Control Mono/Duo
  • LipuLift-P/LipuLift-PF
Description
  • 4–20 mA
  • For secure switching cable lengths > 12 m
  • 0–200 mbar
  • With cable for installation: 20 m
  • Weight: 2 kg

Pressure pick-up

Image
Suitable for
  • Control ACO Multi-Control Mono/Duo
  • LipuLift-P/LipuLift-PF
Description
  • 4–20 mA
  • For secure switching cable lengths > 12 m
  • 0–200 mbar
  • Cable for installation: 40 m
  • Weight: 3.4 kg

Signalling unit

Image
Suitable for
  • Faecal matter backflow automatic stop Quatrix-K type 3F
  • All Muli wastewater lifting plants
  • Upstream tank plant mono/duo
  • Muli-Max
  • Sinkamat –K/-KD
  • Sinkamat-Z
  • Sinkamat-Z (underfloor)
    • Duo
  • LipuLift-P
Description
  • Self-charging
  • With floating contact
  • Visual and acoustic
  • Without contact transmitter
  • For mounting outside the potentially explosive atmosphere
  • Dimensions: 175 x 125 x 75 mm W x H x D
  • Protection type: IP65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Ready to plug in with cable: 2 m
  • Weight: 1.4 kg

Message system with GSM module

Suitable for
  • Faecal matter backflow automatic stop Quatrix-K type 3F
  • All Muli lifting plants
  • Muli-Max
  • Sinkamat-Z (underfloor) duo
  • Grease separators
  • Measuring device for grease layers
  • Wet refuse collection systems
  • Technical processing systems
Description
  • Does not require mains power
  • Visible and audible alarms
  • 6 digital & 2 analogue freely configurable inputs
  • 1 alarm output 12V
  • Incl. GSM- aerial (2,5m wire)
  • Relaying alarms to mobile phones by SMS
  • For mounting outside the ex-area
  • Housing: 155x180 x103 mm
  • Slot for standard SIM-card
  • Protection level: IP54 (with fitted IP44 antenna socket)
  • Operating voltage: 230 V/AC 50/60 Hz
  • Weight: 2 kg

Grease layer thickness measuring device Multi Control

Image
Suitable for
  • Grease separator LipuMax-P, LipuLift-P for underground installation
Description
  • To determine the disposal intervals of grease separators
  • Suitable for liquid and/or harden fats
  • Delineation with colour-touchpanel
  • With integrated SD-card (4GB) for recording of the measuring process
  • With headed sounding stick (temperature is adjustable) to increase the operation safety
  • Three free of potential contacts for outoput of pre-alarm (adjustable), full-alarm (adjustable) and error
  • Measuring stick with adjusting scale
  • Delineation with plug-in cable connection, 3 m
  • Service voltage: 100 240VAC 50/60 Hz, 2 A
  • Power: ca. 43 W
  • Cable length: 10 m
  • Weight: 6.5 kg

Grease layer thickness measuring device Multi Control

Image
Suitable for
  • Grease separator LipuMax-P, LipuLift-P for underground installation
Description
  • To determine the disposal intervals of grease separators
  • Suitable for liquid and/or harden fats
  • Delineation with colour-touchpanel
  • With integrated SD-card (4GB) for recording of the measuring process
  • With headed sounding stick (temperature is adjustable) to increase the operation safety
  • Three free of potential contacts for outoput of pre-alarm (adjustable), full-alarm (adjustable) and error
  • Measuring stick with adjusting scale
  • Delineation with plug-in cable connection, 3 m
  • Service voltage: 100 240VAC 50/60 Hz, 2 A
  • Power: ca. 43 W
  • Cable length: 20 m
  • Weight: 7.8 kg

Grease layer thickness measuring device Multi Control

Image
Suitable for
  • Grease separator LipuMax-P, LipuLift-P for underground installation
Description
  • To determine the disposal intervals of grease separators
  • Suitable for liquid and/or harden fats
  • Delineation with colour-touchpanel
  • With integrated SD-card (4GB) for recording of the measuring process
  • With headed sounding stick (temperature is adjustable) to increase the operation safety
  • Three free of potential contacts for outoput of pre-alarm (adjustable), full-alarm (adjustable) and error
  • Measuring stick with adjusting scale
  • Delineation with plug-in cable connection, 3 m
  • Service voltage: 100 240VAC 50/60 Hz, 2 A
  • Power: ca. 43 W
  • Cable length: 30 m
  • Weight: 9.6 kg

Grease layer thickness measuring device

Image
Suitable for
  • Grease separator LipuMax-P for underground installation
  • LipuLift-P
Description
  • For electronic measurement of layer of grease
  • Suitable for liquid and/or congealing grease
  • Measuring device with plug and used connecting cable, length: 3 m
  • With two voltage-free changeover contacts to display full warning (100%) and advance warning of fill level (80%)
  • With visual display of fill level for advance warning and full warning
  • With heated probe rod to increase reliability of operation
  • Operating voltage: 230 V/50 Hz
  • Max consumption approx. 12W
  • Cable length: 10 m
  • Weight: 6.4 kg

Grease layer thickness measuring device

Image
Suitable for
  • Grease separator LipuMax-P for underground installation
  • LipuLift-P
Description
  • For electronic measurement of layer of grease
  • Suitable for liquid and/or congealing grease
  • Measuring device with plug and used connecting cable, length: 3 m
  • With two voltage-free changeover contacts to display full warning (100%) and advance warning of fill level (80%)
  • With visual display of fill level for advance warning and full warning
  • With heated probe rod to increase reliability of operation
  • Operating voltage: 230 V/50 Hz
  • Max consumption approx. 12W
  • Cable length: 20 m
  • Weight: 7.8 kg

Grease layer thickness measuring device

Image
Suitable for
  • Grease separator LipuMax-P for underground installation
  • LipuLift-P
Description
  • For electronic measurement of layer of grease
  • Suitable for liquid and/or congealing grease
  • Measuring device with plug and used connecting cable, length: 3 m
  • With two voltage-free changeover contacts to display full warning (100%) and advance warning of fill level (80%)
  • With visual display of fill level for advance warning and full warning
  • With heated probe rod to increase reliability of operation
  • Operating voltage: 230 V/50 Hz
  • Max consumption approx. 12W
  • Cable length: 30 m
  • Weight: 9.6 kg

Signal horn

Image
Suitable for
  • Signalling unit with voltage-free fault reporting
  • LipuSmart-P
  • Muli-Max with signalling unit
  • LipuLift-P
Description
  • 230V AC
  • Power consumption: 15mA
  • 172x70x78mm (LxBxT)
  • Protection: IP33
  • 92 dB(A)
  • Weight: 0.3 kg

Signal horn

Image
Suitable for
  • Signalling unit
  • Signalling unit with GSM module
Description
  • Operating voltage: 12V DC
  • Power consumption: 30 mA
  • 62 x 62 x 85 mm (LxWxD)
  • Degree of protection: IP66
  • Noise level: 95 dB(A)
  • Weight: 0.2 kg

Flashing light

Image
Suitable for
  • Signalling unit with voltage-free fault reporting
  • LipuSmart-P
  • Muli-Max with signalling unit
  • LipuLift-P
Description
  • 230V
  • Power consumption: 70 mA
  • Weight: 0.5 kg

Flashing light

Image

Outdoor cabinet for on-site pressure pipe

Image
Suitable for
  • GRP outdoor cabinet for on-site pressure line
    • DN 80
    • DN 100
    • DN 125
    • DN 150
,
  • LipuLift-P Serie
Description
  • With reserve space for installation of an on-site backflow loop according to DIN 12056-4 and 1986-100
  • With mounting plate incl. base
  • With heating and thermostat
  • With CEE32 and work socket with earth contact
  • Dimension: 2000 x 806 x 335 mm (H x W x D)
  • Weight: 100 kg

In-wall frame

Image
Suitable for
  • Connection box
    • 7601.80.22
,
  • LipuLift-P-D/-DA/-DAP
Description
  • Stainless steel, material grade 304
  • Dimensions (width x height x depth): 421 x 381 x 25 mm
  • Weight: 1 kg

In-wall frame

Image
Suitable for
  • Connection box
    • 7601.80.24
,
  • LipuLift-P-D/-DA/-DAP
Description
  • From stainless steel, material grade 304
  • "In-wall” version
  • Glass beaded front
  • Dimension W x H x D:
    • 405 x 830 x 30 mm
  • Weight: 2.1 kg

Connection box

Image
Suitable for
  • Grease separators
  • Starch separators
,
  • LipuLift-P-D/-DA/-DAP
Description
  • For evacuation connection and remote control
  • Made from stainless steel, material grade 304
  • Fixing: "On wall"
  • Dimensions (width x height x depth): 500 x 500 x 160 mm
  • Weight: 11.6 kg

In-wall frame

Image
Suitable for
  • Connection box
    • 7601.80.20
,
  • LipuLift-P-D/-DA/-DAP
Description
  • Dimensions (width x height x depth): 565 x 565 x 15 mm
  • Weight: 1.2 kg

Connection box

Image
Suitable for
  • Grease separators
    • LipuMax-P-D/DM/DA
    • LipuJet-P-OD/RD/SD/OM/OMP/RM/RMP
    • LipuJet-S-OD/RD/SD/OM/OMP/RM/RMP
  • Stach seperators FapuMax-P-DA
  • Oil separators Coalisator-P
,
  • LipuLift-P-D/-DA/-DAP
Description
  • For evacuation connection DN 80
  • Made from stainless steel, material grade 304
  • "On wall" version
  • Door stop
    • Choice of left or right
    • Lockable door
  • Dimensions (width x height x depth): 370 x 330 x 250 mm
  • Weight: 10.4 kg

Connection box

Image
Suitable for
  • Grease separator
  • Starch separators
,
  • LipuLift-P-D/-DA/-DAP
Description
  • For disposal connection, pendulum gas line (if necessary) and remote control
  • From stainless steel, material grade 304
  • "Surface mounted” version
  • Glass beaded front
  • Lockable door, left limit stop
  • Dimensions W x H x D: 300 x 725 x 160 mm
  • Weight: 10 kg

Compression fitting 63 x 75 mm

Image
Suitable for
  • Powerlift installation kit DN 50
  • Powerlift–P
  • LipuLift-P
Description
  • Material: PP
  • Pressure level: PN16
  • For extending the pressure line diameter from Ø63 mm to Ø75 mm
  • Weight: 0.8 kg

Compression fitting 63 x 90 mm

Image
Suitable for
  • Powerlift installation kit DN 50
  • Powerlift–P
  • LipuLift-P
Description
  • Material: PP
  • Pressure level: PN16
  • For extending the pressure line diameter from Ø63 mm to Ø90 mm
  • Weight: 0.7 kg

Storz coupling for swinging gas lines

Image
Suitable for
  • For installation in connection box art. no. 7601.80.22
Description
  • Storz coupling 75B
  • For connection of the disposal vehicle pendulum gas line
  • For pipe connection Rp 2 ½" (female thread)
  • Weight: 1.8 kg

Disposal shaft 450

Image
Suitable for
  • Grease separator for below ground installation
    • LipuMax-P-D
    • LipuMax-P-DM
    • LipuMax-P-DA
  • Starch separator FapuMax-P-DA for below ground installation
,
  • LipuLift-P-D/-DA/-DAP
Description
  • Made of plastic, material polyethylene
  • With cover from concrete/cast-iron
    • Clear width: 450 mm
    • Load class: B 125 or D 400 (with on-site load distribution plate)
  • Inscription "Abscheiderentleerung/Separator Discharge"
  • Weight: 137.2 kg

Disposal shaft 450 with load distribution plate

Image
Suitable for
  • Grease separator for below ground installation
    • LipuMax-P-D
    • LipuMax-P-DM
    • LipuMax-P-DA
  • Starch separator FapuMax-P-DA for below ground installation
,
  • LipuLift-P-D/-DA/-DAP
Description
  • Made of plastic, material polyethylene
  • Buoyancy-proof up to the top of the terrain
  • With cover from concrete/cast-iron
    • Clear width: 450 mm
    • Load class: D 400
  • Inscription "Abscheiderentleerung/Separator Discharge"
  • Weight: 562.2 kg

Extension

Image
Suitable for
  • Disposal shaft
Description
  • Made from plastic, material polyethylene
  • For fitting on upstream shaft for deep installations
  • Structure height: 100 – 650 mm
    • (can be reduced to 45 mm by cutting off at cutting marks)
  • Max. two extension can be used
  • Weight: 10.9 kg

Guide strap

Image
Suitable for
  • Top section
    • 0178.08.35
,
  • 2 Stk. bei LipuLift-P
Description
  • Quantity required
    • 1 pce for Muli-Max Mono
    • 2 pces for Muli-Max Duo
  • Weight: 1.6 kg

Washing hose 1 SN 10 – 150 DKO/DKO-L-90°

Image
Suitable for
  • Grease separator for underground installation
    • LipuMax-P-DM
    • LipuMax-P-DA
  • Stach seperator FapuMax-P-DA for underground installation
  • LipuLift-P-DA/-DAP
Description
  • To connect a high-pressure pump in the building and a high-pressure cleaning head in the grease separator
  • Length: 10 m
  • Weight: 10 kg

Washing hose 1 SN 10 – 150 DKO/DKO-L-90°

Image
Suitable for
  • Grease separator for underground installation
    • LipuMax-P-DM
    • LipuMax-P-DA
  • Stach seperator FapuMax-P-DA for underground installation
  • LipuLift-P-DA/-DAP
Description
  • To connect a high-pressure pump in the building and a high-pressure cleaning head in the grease separator
  • Length: 20 m
  • Weight: 10.3 kg

Washing hose 1 SN 10 – 150 DKO/DKO-L-90°

Image
Suitable for
  • Grease separator for underground installation
    • LipuMax-P-DM
    • LipuMax-P-DA
  • Stach seperator FapuMax-P-DA for underground installation
  • LipuLift-P-DA/-DAP
Description
  • To connect a high-pressure pump in the building and a high-pressure cleaning head in the grease separator
  • Length: 30 m
  • Weight: 19 kg

Operating key

Suitable for
  • LipuLift-PF
Description
  • Length 1735 mm
  • With chain

Operating Logbook

Suitable for
  • Grease separator
    • For underground installation
    • For free-standing installation
Description
  • Contents: Check-list and standard forms to document in-house monitoring, maintenance and disposal relating to the plant as required by DIN 4040-100
  • Format: A4 with double filing rings
  • Size: 60 pages
  • Laid out to cover 5 years
  • Weight: 0.3 kg