Building Drainage

ACO Waste-Jet – Comfort type 3

Product benefits

  • Hygienic collection and disposal
    • No cold room requirement
    • No temporary storage in bins
    • Sealed odour-tight
    • Reduced disposal interval through optional clean water removal
    • Self-contained system chain
    • Prevention of cross-contamination
    • Leftovers disposal where they are produced (short transport routes)
  • Compact bring-in dimensions
  • Rugged construction with 25-year stability verification

Product information

  • Disposal connection DN 65 for direct extraction
  • Cleaning by opening the cover
  • For installation in frostproof rooms
  • Tank made of polyethylene
  • Connection options (socket 1½") for linking a maximum of three feed stations
  • Level monitoring with floating contact for forwarding to feed station(s) and central building control system
  • Ventilation connection DN 100
  • Two maintenance openings Ø 450 mm sealed odour-tight with clamping rings
Scale drawing
TypeUsable volumeDimensions
LBH1
[l][mm][mm][mm]
OD 183022507001700
OD 2200029509501850

Connection box

Image
Suitable for
  • Grease separators
  • Starch separators
Description
  • For evacuation connection and remote control
  • Made from stainless steel, material grade 304
  • Fixing: "On wall"
  • Dimensions (width x height x depth): 500 x 500 x 160 mm
  • Weight: 11.6 kg

In-wall frame

Image
Suitable for
  • Connection box
    • 7601.80.20
Description
  • Dimensions (width x height x depth): 565 x 565 x 15 mm
  • Weight: 1.2 kg

Connection kit

Suitable for
  • Clean water removal
  • Connection to grease separator DN 100
Description
  • Tee (1" internal thread, DN 100)
  • 2x pipe connectors with seal

Connection kit

Suitable for
  • Clean water removal
  • Connection to grease separator DN 150
Description
  • Tee (1" internal thread, DN 150)
  • 2x pipe connectors with seal

Connection kit

Suitable for
  • Clean water removal
  • Connection to grease separator DN 200
Description
  • Tee (1" internal thread, DN 200)
  • 2x pipe connectors with seal

Signalling unit

Image
Suitable for
  • Powerlift installation kit DN 50
  • Powerlift–P
Description
  • Self loading
  • With volt free contact
  • Visible and audible
  • Without floater
  • For mounting outside the explosive-area
  • Housing: 125 x 175 x 75 mm
  • Protection level: IP65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use with cable: 2 m

Signalling unit

Image
Suitable for
  • Faecal matter backflow automatic stop Quatrix-K type 3F
  • All Muli wastewater lifting plants
  • Upstream tank plant mono/duo
  • Muli-Max-F
  • Sinkamat-S
  • Sinkamat-Z
  • Sinkamat-Z (underfloor)
    • Duo
Description
  • Self loading
  • With volt free contact
  • Visible and audible
  • Without floater
  • For mounting outside the explosive-area
  • Housing: 125 x 175 x 75 mm
  • Protection level: IP65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use with cable: 2 m
  • Weight: 1.4 kg

Message system with GSM module

Suitable for
  • Faecal matter backflow automatic stop Quatrix-K type 3F
  • All Muli lifting plants
  • Muli-Max-F
  • Sinkamat-Z (underfloor) duo
  • Grease separators
  • Measuring device for grease layers
  • Wet refuse collection systems
  • Technical processing systems
Description
  • Does not require mains power
  • Visible and audible alarms
  • 6 digital & 2 analogue freely configurable inputs
  • 1 alarm output 12V
  • Incl. GSM- aerial (2,5m wire)
  • Relaying alarms to mobile phones by SMS
  • For mounting outside the ex-area
  • Housing: 155x180 x103 mm
  • Slot for standard SIM-card
  • Protection level: IP54 (with fitted IP44 antenna socket)
  • Operating voltage: 230 V/AC 50/60 Hz
  • Weight: 2 kg

Clean water removal

Image
Suitable for
  • ACO Waste-Jet Classic
    • OD/OA/OAE
    • RD/RA/RAE
Description
  • For optimum utilisation of the Waste-Jet Classic collection volume capacity
  • Including fixing material and connection bracket
  • With control system and impeller pump
  • Drainage of the clean water according to municipal requirements
  • Manual control

Clean water removal

Image
Suitable for
  • ACO Waste-Jet Classic
    • OD/OA/OAE
    • RD/RA/RAE
Description
  • For optimum utilisation of the Waste-Jet Classic collection volume capacity
  • Including fixing material and connection bracket
  • With control system and impeller pump
  • Drainage of the clean water according to municipal requirements
  • Automatic control

Hose extension set

Suitable for
  • ACO Waste-Jet Classic
    • OD/OA/OAE
    • RD/RA/RAE
Description
  • 15 metre microbe-resistant flexible hose
  • Cast connection on both sides
  • Connection material for connection to the
  • Collection tank included

Remote display

Image
Suitable for
  • ACO Waste-Jet
    • Comfort
    • Classic
Description
  • Tank fill level display
    • Red = tank full, feed station blocked
    • Yellow = tank 80% full, arrange disposal
    • Green = ACO Waste-Jet ready for operation

Storz coupling for swinging gas lines

Image
Suitable for
  • For installation in connection box art. no. 7601.80.22
Description
  • Storz coupling 75B
  • For connection of the disposal vehicle pendulum gas line
  • For pipe connection Rp 2 ½" (female thread)
  • Weight: 1.8 kg

Connection box

Image
Suitable for
  • Grease separator
  • Starch separators
Description
  • For disposal connection, pendulum gas line (if necessary) and remote control
  • From stainless steel, material grade 304
  • "Surface mounted” version
  • Glass beaded front
  • Lockable door, left limit stop
  • Dimensions W x H x D: 300 x 725 x 160 mm
  • Weight: 10 kg

In-wall frame

Image
Suitable for
  • Connection box
    • 7601.80.24
Description
  • From stainless steel, material grade 304
  • "In-wall” version
  • Glass beaded front
  • Dimension W x H x D:
    • 405 x 830 x 30 mm
  • Weight: 2.1 kg